Description
The Kem Kupper ZHM MK Gear Flow Meter (ball bearing design) are flow meters which are mainly used in lubrication and low-viscous liquids. Therefore they are used especially for the fuel consumption measurement and the dosing of low viscous media.
Only high-grade steels that even withstand corrosive liquids are used in the production of gear flow meters. Combined with the use of high-quality precision ball bearings, the Kem Kupper ZHM MK Gear Flow Meter guarantees optimum measurement accuracy and a long service life under even the toughest application conditions. The ball bearing facilitates a very low starting torque of the measuring element. This way even the lowest flow rates can be accurately measured.
Short response times, very dynamic performance and high measurement accuracy ensure accurate regulation and control of flow rates in demanding applications.
Applications
For applications in hazardous areas, Kem Kupper ZHM MK Gear Flow Meter offer intrinsically safe sensors and amplifiers with Ex protection in accordance with ATEX, IECEx, CSA and other standards. Additional certifications such as EAC (TR-CU) are available.
- Diesel- and fuel consumption
- Additive dosage
- Leakage measurement
- Odorization
- Laboratory and test bench applications
Features Kem Kupper ZHM MK Gear Flow Meter
- Measuring range from 0.002 l/min up to 70 l/min
- High measuring accuracy up to ±0.1 %1)
- Exceptional repeatability of ±0.05 %
- Measuring range up to 1:500
- High resolution and short response time
- Pressure-resistant up to 420 bar [6,000 psi]
- Robust construction and long lifetime
Specifications of Kem Kupper ZHM MK Gear Flow Meter
Technical Data
- Measuring Accuracy Up to ±0.1 %4)
- Repeatability ±0.05 % (under the same conditions)
- Linearity
- ±1.5 % of actual flow (viscosity ≥ 5 mm²/s)
- ±2.5 % of actual flow (viscosity ≥ 5 mm²/s for ZHM 01/3)
- Housing: as per DIN 1.4305 [AISI 303], 1.4404 [AISI 316L]
- Materials
- Gears: as per DIN 1.4122
- Bearing: Stainless steel ball bearing
- Seals: FKM, PTFE (others on request)
- Medium Temperature -40 °C up to +180 °C [-40 °F up to +356 °F]
- Dimensions See dimensional drawing (page 5 of datasheet)
Technical Data – Filter Element (optional for ZHM 01/3)
- Type SS-6F-MM15
- Mounting position Horizontal/vertical
- Max. Pressure Max. 200 bar [2,900 psi] (at +37 °C [+98 °F])
- Max. 160 bar [2,320 psi] (at +120 °C [+248 °F])
- Material As per DIN 1.4401 [AISI 316]
- Mesh 15 μm
- Pressure Drop Approx. 300 mbar (at 0.5 l/min and 2 mm²/s)
- Installation Length Approxs. 80 mm/SW 19
- Connection 6 mm tube
Download Datasheet: ZHM MK Series Kem Kupper Gear Flow Meter
Reference : kem-kueppers.com
Another Article:
- Tokyo Keiki UFW-100 Ultrasonic Flowmeter
- Jain Xonic 100P Portable Ultrasonic Flow Meter
- SiteLab SL1278 Handheld Ultrasonic Flowmeter
- Lorric FU-TX 310 Clamp-on Ultrasonic Flow Meter
- Sonic LF-2000 Ultrasonic Liquid Flow Meter