Deep Sea Electronics DSEE100 Engine Control Module

Deep Sea Electronics DSEE100  is an Engine Only Control Module designed to provide flexible engine control with built-in monitoring and protection. The module is fully configurable for a wide range of applications including engine-driven pumps and compressors.

Control functions include manual and automatic engine start and load control and a built-in run-time scheduler. The DSEE100 also features an event log to help make fault diagnosis extremely simple. The module is configured using the DSE Configuration Suite software.

Deep Sea Electronics DSEE100 Specifications :

DC Supply

Continuous Votlage Rating

  • 8 V to 35 V continuous

Cranking Droputs

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

Maximum Operating Current

  • 85 mA at 12 V, 96 mA at 24 V

Maximum Standby Current

  • 51 mA at 12 V, 47 mA at 24 V

Maximum Sleep Current

  • 35 mA at 12 V, 32 mA at 24 V

Charge Fail/Excitation Range

  • 0 V to 35 V

Deep Sea Electronics DSEE100 Inputs

Digital Inputs A To D

  • Negative switching

Analogue Inputs A To C
Configurable as:

  • Negative switching digital input
  • Resistive

Deep Sea Electronics DSEE100 Outputs

DC Output A (Fuel) & B (Start)

  • 10 A short-term
  • 5 A continuous at supply voltage

Volt-free Outputs C & D

  • 2 A DC at supply voltage

Auxiliary Outputs C, D, E & F

  • 2 A DC at supply voltage

Pulse Pick-up

Voltage Range

  • +/- 0.5 V to 70 V

Frequency Range

  • 5 Hz to 10,000 Hz
Overall Size
140 mm x 113 mm x 43 mm (5.5″ x 4.4″ x 1.7″)
Panel Cut Out
118 mm x 92 mm (4.6″ x 3.6″)
Product Variants
E100-01 – E100 Engine Controller
%d bloggers like this: