APG Mid Range Pump Control Ultrasonic Level Sensor DST are programmable via the DCR controller series, and are often used for level-based pump control. The DST series APG Ultrasonic Level Sensor are designed to be used in conjunction with a DCR controller to give you a simplified, stand-alone system.
The transmit and receive circuit is built into the sensor and digitally communicates the detected distance to the DCR controller. This allows the sensor to be separated from the DCR controller by up to 2000 feet with no signal loss. With several sensors to choose from, there are plenty of options for your application needs.
APG Mid Range Pump Control Features
- AutoSense software provides hassle-free setup
- Internal Temperature Compensation
- Controller and sensor can be separated up to 2000 ft. (650 m)
The DST ultrasonic level sensors work in conjunction with the DCR controllers to give you a simplified, stand-alone system for level measurement and control.
This system of DST liquid level sensors and DCR controllers has proven itself for over a decade, and still solves applications today.
Because there are several sensors and controllers to choose from, using DST ultrasonic sensors give you plenty of options for your application needs.
APG Mid Range Pump Control Specification
|Operating Range||1-25 ft. (2421)|
|1.25 – 50 ft. (3431)|
|4 – 72 in. (5411)|
|0.5 – 35 ft. (9421)|
|Beam Pattern||9° off axis|
|Accuracy||±0.25% of detected range|
|Wiring Connection||2 conductor shielded cable|
|Method||Interface with DCR Controller via APG Modbus Software|
|Functions||Trip point configurations|
|User selected units of measure|
|Transducers||Ceramic with PVDF face (models 2421 & 5111)|
|Ceramic with PC/PET face (model 3431)|
|Open electrostatic transducer (model 9421)|
|Ratings||NEMA 6P, IP65, NEMA 12|
|Operating Temperature||-22° – 140°F (-30° – 60°C)|
Download Data Sheet: Mid Range Pump Control Ultrasonic Level Sensor DST