APG MLS Series Mechanical Float Level Switch provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. The large, buoyant and robust float of the MLS allows it to be used in harsh applications where fouling or buildup might otherwise be of concern. Flexibility in the field. Tailor this float switch to your needs in the field with an adjustable switch point and hysteresis.
- Direct Pump Control
MLS Series float switches have a 10 A SPDT miniature switch for direct control over small horsepower pumps.
- Field Adjustable
The two float stops on the stem of an MLS Series float switch are field adjustable for optimum switch point control. Simply loosen the screw on the float stop, slide it up or down, and tighten it again.
- Mechanical Hysteresis
MLS Series float switches switch on when the float hits the top float stop, but does not switch off again until the weight of the float itself lands on the bottom stop. This mechanical hysteresis is ideal for pump control.
APG MLS Series Features
- Direct pump control
- Adjustable On/Off switching levels
- Simple installation
- Field adjustable probe length
Specification
| Performance | |
| Operation | 1 NO, NC Adjustable Switch Point |
| Adjustable Mechanical Hysteresis | |
| Minimum SG | 0,059027778 |
| Physical | |
| Float & Rod | 304SS |
| Protective Bellows | Neoprene |
| Housing | Polycarbonate |
| Electrical | |
| Output Contact Rating | 250 V 10 A AC; 250 V 0.4 A DC (resistive) |
| Connectivity | |
| Output | 1 10 A SPDT miniature switch |
| Environmental | |
| Operating Temperature | 32 to 176° F |
| Enclosure Protection | IP42 |
| NEMA 1 | |
Download Data Sheet: Mechanical Float Switch MLS
Ref: apgsensors.com
other Article:
You must be logged in to post a comment.