Bamo CF80 Series Level Indicators and Controllers

Bamo CF80 Series Level Indicators and Controllers

Bamo CF80 Series Level Indicators and Controllers Under the thrust of the fluid, the float transmits the level through a rod transmission to a vertical stem. The stem actuates a pointer on the dial, the contacts, or/ and a potentiometer for output resistive signal image of the level. Gauge is mounted on the top of the tank.

The instrument is available in various versions according to requirements:

  • Direct reading of level on top or/ and side of gauge head.
  • 1 to 3 contacts (2-way contact), high and low levels, and/ or pump automation
  • Output for continuous resistive signal

The complete system is supplied ready to install and to use. Models JE80, CF80, and JLD are designed for tanks with a height of 150 to 500 mm. Model JE80N is designed for tanks with a height of 150 to 650 mm.

Bamo CF80 Features

  • Height from 150 to 650 mm
  • Fitting: BSP 2”, male
  • Head housing: IP54
  • 3 possible functions:
    • Direct reading on dial
    • With 1 to 3 contacts, potential free
    • Output signal: continuous resistive signal (Ω)

Application

These controllers for alarms on low, high levels, and transmitters of continuous level, are designed for indoor and small tanks.

  • Diesel in tanks
  • Day-tanks
  • Lubricating oil
  • Glycol water
  • Rainwater

Particularly suited for small storage tanks (150 to 650 mm high), e.g. on filling automation of tanks for diesel generators.

Another Article:

Bamo CF80 Specification

Materials Steel, Nylon, brass, stainless steel
Float: foamed PVC
Flange seal: Cork gasket
Fitting BSP 2”, male
Head housing IP 54
Dial Above: Orange background; Graduations at 0, 1/2 and
1 (fig1.)
Side: White background; Graduations at 0, 1/2 and 1
(fig.2)
Operating pressure Atmospheric
Operating temperature From 0 to 40 °C
Contacts Default setting:
Low level alarm: 20 % capacity (Change-over contact, 10 A, 230 V, potential free)
High level alarm: 85 % capacity (Change-over contact, 10 A, 230 V, potential free)
Filling function: ON at 40 % and OFF at 80 % capacity (2-way contact, 10 A, 230 V, potential free)
On request: Factory setting between 20 and 85 % capacity.
Output, resistive signal From 0 to 160 Ω (approx., ±15 %)

Download Data Sheet: Level Indicators and Controllers CF80 Series

Ref: bamo.eu

Share
%d bloggers like this: