Description
Bamo MAXIMAT LW VK is designed to detect conductive liquids non-electrically conductive. The detection results from the position of a magnet inside the float and a Reed contact inside the probe. It is necessary to use it with a SHR C transducer. The liquids may not generate deposit originating jamming of float.
Bamo MAXIMAT LW VK Features
- Float level fail-safe detection
- For aggressive and non electrically conductive liquids
- Positive active alarm
- Auto diagnostic system and LED indication when in use with a SHR C transducer
- Approvals: DIBT Z-65.40-272, for leakage detection, WHG§19 when in use with a SHR C transducer
Application
The MAXIMAT is ideal for permanently survey risks of leakage of a liquid from storage tanks, filling equipment, dosing pumps etc. Convenient to use with non-electrically conductive liquids, oils, emulsified, non-flammable, water endangering liquids. It is a perfect instrument to detect fluid in a double-wall tank. MAXIMAT LW VK operates with liquids of specific weight from 0.7 g/cm3
Bamo MAXIMAT LW VK Specification
Main power supply: | 24 V DC ± 10 %; caution: DC current circuit should be protected by a fuse of 250 mA. |
Power consumption: | approx. 3 W |
Ambient temperature: | -20 to +60° C |
Operating pressure: | atmospheric, 0.8 to 1.1 bar |
Probe | |
material: | PE-HD |
cable: | TPK, 2 x 0.5 mm2, shielded |
Hysteresis: | about 2 mm |
Terminal housing: | PBT, fibre glass reinforced, IP 65 acc. EN 60 529 |
Terminals: | screw connectors, IP 20; max. wire cross-section 2.5 mm2 |
Output: | to a transducer MAXIMAT SHR C |
Cable length 300 m maximum, wire cross section 0.5 mm2 as a minimum | |
CE mark: | in accordance with low-voltage directive (73/23/CEE) and EMC directives (89/336/CEE) and standards EN 50 082-2: 1995, EN 55 011 (class A): 1998 |
Approvals: | DIBT Z-65.40-272, for leakage detection |
Ref: bamo.eu
Download Data Sheet: Bamo MAXIMAT LW VK lLeakage Detection Sensor
Other Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor