Bamo MAXIMAT TC1 Level 1 Channel Alarm Unit

Bamo MAXIMAT TC1 is a signaling unit for overfill and leakage detectors MAXIMAT (X series) and MAXITOP. The detector is powered directly by TC1 unit. The built-in buzzer provides local alarm to the operator, and the LEDs inform visually about the alarm status. The audible alarm is acknowledged through the push-button on the right side.

Bamo MAXIMAT TC1 Features

  • Alarm unit, 1 channel, for: MAXIMAT CX & and MAXITOP series, overfill and leak detectors
  • Optical and acoustic alarms (> 75 dB)
  • Diagnostic of detection loop
  • Relay output, changeover contact
  • Robust and inexpensive


Alarm signaling device for

  • Containers for storage of liquids, in safe area
  • Retention basins, piping
  • Tanks and collecting basins

Another Article:

Bamo MAXIMAT TC1 Specification

Power supply 230 V AC ±10 %; 50/60 Hz; 24 V DC
Consumption About 2 VA / 2 W
Protection IP 65 according EN 60 529
Temperature -20 … +60 °C
Connections Screw terminals
Indications Green LED for “operating system”
Red LED for ”alarm in progress”
Yellow LED for “alarm not yet acknowledged”
Integrated audible alarm; can be disabled
Output relay Max. 230 V AC / 3 A; potential free changeover contact
Housing Polycarbonate, 120x80x55 mm; for wall mounting

Download Data Sheet: Level 1 Channel Alarm Unit MAXIMAT TC1


%d bloggers like this: