Bamo NIVASWITCH Vibrating Fork Level Detector

Bamo NIVASWITCH Vibrating Fork Level Detector

Bamo NIVASWITCH Vibrating Fork Level Detector is easy to use and can detect most liquids. It works independently of electric conductivity, clogging, turbulence, flow-rate and air bubbles. The trigger point depends of the immersion depth.

Robust and compact, NIVASWITCH may be mounted vertically or horizontally Easy to install, it does not require maintenance. Status of output is indicated by a bi-color (LED) and a function test is performed with a magnet The alternative current output or digital output (NPN or PNP) can be connected to a PLC. As an option, the relays PKK or LC1, allow to convert the output as a potential free contact signal.

Bamo NIVASWITCH Features

  • Detection of level for liquids
  • Continuous monitoring
  • Operating even with turbulence
  • Unnecessary calibration routine
  • Operating even with suspended solids

Application

NIVASWITCH is a liquid level detector. It is mainly used for overfill protection, leak detection or dry run protection of pumps.

Another Article:

Bamo NIVASWITCH Specification

Insertion length 69 or 125 mm (from sealing surface)
Material AISI 316 Ti
Fitting 1“ BSP
Liquid temperature -40 … 130 °C (see the temperature limits diagrams)
Ambient temperature -40 … 70 °C (see the temperature limits diagrams)
Liquid pressure Max. 40 barg (See the diagram: pressure vs.
temperature)
Liquid S.G. ≥ 0.7
Viscosity ≤ 10,000 mm²/s (cSt)
Supply / Output (2 versions) or 12 … 55 V DC / DC, 3-wire, PNP or NPN
or 20 … 255 V AC / AC, 2-wire
Consumption AC: Depending on connected load / DC: < 0.6 W
Electrical connections DIN Connector
Electrical protection AC version: Classe I / DC version: Classe III
IP Protection IP 65
Mass 0.5 kg

Ref: bamo.eu

Download Data Sheet: Vibrating Fork Level Detector NIVASWITCH

Share