Bamo NIVASWITCH Vibrating Fork Level Detector is easy to use and can detect most liquids. It works independently of electric conductivity, clogging, turbulence, flow-rate and air bubbles. The trigger point depends of the immersion depth.
Robust and compact, NIVASWITCH may be mounted vertically or horizontally Easy to install, it does not require maintenance. Status of output is indicated by a bi-color (LED) and a function test is performed with a magnet The alternative current output or digital output (NPN or PNP) can be connected to a PLC. As an option, the relays PKK or LC1, allow to convert the output as a potential free contact signal.
Bamo NIVASWITCH Features
- Detection of level for liquids
- Continuous monitoring
- Operating even with turbulence
- Unnecessary calibration routine
- Operating even with suspended solids
Application
NIVASWITCH is a liquid level detector. It is mainly used for overfill protection, leak detection or dry run protection of pumps.
Bamo NIVASWITCH Specification
Insertion length | 69 or 125 mm (from sealing surface) |
Material | AISI 316 Ti |
Fitting | 1“ BSP |
Liquid temperature | -40 … 130 °C (see the temperature limits diagrams) |
Ambient temperature | -40 … 70 °C (see the temperature limits diagrams) |
Liquid pressure | Max. 40 barg (See the diagram: pressure vs. |
temperature) | |
Liquid S.G. | ≥ 0.7 |
Viscosity | ≤ 10,000 mm²/s (cSt) |
Supply / Output (2 versions) | or 12 … 55 V DC / DC, 3-wire, PNP or NPN |
or 20 … 255 V AC / AC, 2-wire | |
Consumption | AC: Depending on connected load / DC: < 0.6 W |
Electrical connections | DIN Connector |
Electrical protection | AC version: Classe I / DC version: Classe III |
IP Protection | IP 65 |
Mass | 0.5 kg |
Ref: bamo.eu
Download Data Sheet: Vibrating Fork Level Detector NIVASWITCH
Another Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor