Bamo NIVOSTOP SS2 Float Switches are designed for level control in tanks and basins. The cigar-shaped type is for insertion in tank with hole of diameter 30 mm, for instance through the wall or the top of the tank. The float switch rotates on one fixed point on its cable. The float follows the level of the liquid. The built-in contact switches at about 5 to 15° of angle below or above the fixed point. The height of switching point depends on the length of the cable between fixed point and float.
Bamo NIVOSTOP SS2 Float Switches Features
- Mercury-free
- Fair cost
- Easy to install
- Compatible with chemicals
- Switching current 1 mA … 3 A
Application
- Limit switch
- Sewage lifting plants
- Filling / draining control of tank
- Liquid level control in all industries
Specification
| Switching power: | 4V-250VAC;4-30VDC |
| Switching current: | 1 mA … 3A |
| Switch: | Microswitch (gold contacts), changeover contact, potential-free |
| Temperature limits: | +1 … +60 °C |
| Operating pressure: | 0.5 bar as a maximum |
| Mounting, switching angle: | The float switch is fixed with its cable at one point. |
| The float follows the level and tilts around the fixed point. | |
| Liquid density | ϱ ≥ 1.0 kg/dm³ |
| TPK and PES cables: | |
| PVC cable (for lubricating oil): | ϱ ≥ 0.9 kg/dm³ |
| Materials | Polyethylene (PE-HD) |
| Float: | |
| Cable: | TPK, PVC, PVC oil-resistant, acid-resistant sheathed (PES) |
| Protection: | IP 68 |
| Chemical resistance of cables | Water; Alkalis and acids of low concentration |
| TPK: | |
| PES: | Acid-resistant |
| PVC: | Lubricating oil |
Ref: bamo.eu
Download Data Sheet: Float Switches NIVOSTOP SS2
Another Article:
- Bamo NIVOSTOP / C Float Level Controller
- Bamo NIVOSTOP®/ACS Float Level Detector
- Float Type Level Transmitter
- Delta Mobrey Switches