Bamo PVDF BAMONIV Hydrostatic Level Transmitter

Bamo PVDF BAMONIV Hydrostatic Level Transmitter

Bamo PVDF BAMONIV Hydrostatic Level Transmitter is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks. It operates according to the principle of hydrostatic pressure measurement.

The pressure on the sensor increases proportionally with the depth of immersion. BAMONIV integrates ceramic cell and delivers a 4-20 mA signal proportional to the immersion depth. To be mounted at the bottom of a non-pressurized tank, the BAMONIV comes with a connector or a PVC cable.

Bamo PVDF BAMONIV Hydrostatic Level Transmitter Features

  • Level measurement of aggressive fluids
  • Measuring cell: ceramic (96 %)
  • Accuracy: 0.35 % F.S.
  • Ranges from 0 … 0.6 m up to 0 …10 m WC
  • Fitting 1 ½” in PVDF

Application

  • Diesel, lubricating oils
  • Viscous, pasty liquids
  • Corrosive, acidic or basic liquids

Another Article:

Bamo PVDF BAMONIV Hydrostatic Level Transmitter Specification

Measuring ranges 0… 0.6 /… / 0 … 10 m WC
Long term stability ≤ ± 0,1 % FS / year
Accuracy ≤ 0.35 % FS
Measuring cell Ceramic AI₂O₃ 96 %
Fitting material PVDF
Fitting type BSP 1 ½” – DIN 3852
Seal FPM
Connection Or through a connector ISO 4400, or cable output (2
m long)
Power supply 9…32VDC
Output signal 4…20 mA ; 2-wire
Load At 20 mA, Rmax. = (Vs – Vs min.) / 0.02
Electrical protections Reverse polarity, overload, short circuit
Emissions & interferences In conformity with EN 61326
Response time ≤ 0.7 s
Overpressure Less than 8 times the FS
Liquid temperature -40 …+125 °C
Temperature compensation -20 … + 80 °C
Temperature incidence ±0.1%FS/10K
Ambient temperature -40 … + 85 °C (without connector or cable)
Storage temperature -40 …+100 °C (without connector or cable)
Mass 0.2 kg

Download Data Sheet: Hydrostatic Level Transmitter, PVDF BAMONIV

Ref: bamo.eu

Share
%d bloggers like this: