Bamo STS Resistive Level Probes with a relay ES 2001, detects a level of a conductive liquid. The longest electrode is used as the reference. The electrical contact occurs when the reference electrode and another electrode are both in contact with the liquid. Then, the current in detection loop provoques through the relay ES2001, an amplified ON/OFF signal.
Acid resistant materials: With Hastelloy G30 electrode ends and PVC or PVDF stems, the STS probes are useful for level control of most acids. Other electrode ends such as Tantalum, other stem materials (PTFE or PPH), are available on request.
Bamo STS Features
- For aggressives and conductive chemicals
- PVC or PVDF
- Up to 5 electrodes
- Custom manufacturing
- Fixed alarming level
Application
Level control of electrically conductive and corrosive liquids
- Metal finishing industry
- Control of presence or absence of liquid (leak detection, empty piping etc.)
- Pump automation (fill or drain) with ES 2001 relay
Bamo STS Specification
Type | STS/A | STS/Z | STS/D | STS/V | STS/F |
Number of electrodes | 1 | 2 | 3 | 4 | 5 |
BSP fitting | ¾” | 2″ | 2″ | 2″ | 2″ ½ |
Flange PN 10 | ND 25 | ND 65 | ND 65 | ND 65 | ND 80 |
Min. length (L in mm) | 50 | 70 | 70 | 70 | 70 |
Max. length (in mm) | 3000 | ||||
Temperature | See corrosion table | ||||
Max. Pressure | 4 bar at 20 °C | ||||
Head housing | In PBT, IP 65 | ||||
MATERIALS | |||||
Electrode | Hastelloy G30 | ||||
Stem and fitting | PVC (max. 55 °C for water) | ||||
PVDF (Max. 110 °C for water) |
Download Data Sheet: Resistive Level Probes STS
Ref: bamo.eu
Other Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor