Bamo STE Resistive Level Probe

Bamo STE Resistive Level Probe

Bamo STE Resistive Level Probe in combination with a relay ES2001 detect the level of electrically conductive liquids. According to the model, up to 5 levels may be triggered (using the tank as the reference electrode) Provide a reference electrode if the tank is made of insulating material.

These STE probes are not suitable for liquids with hydrocarbons or grease or for any other application where an insulating layer may deposit on the electrodes.

Bamo STE Resistive Level Probe Features

  • For level control
  • Applications with conductive liquids
  • 1 to 5 Detection electrodes
  • Level regulation with relays ES2001


  • Level control in open or closed vessels
  • Alarm for excess or lack of liquid (leak detection, empty piping, dry-pump prevention, etc.)
  • Fill or drain function with ES 2001 relay

Another Article:

Bamo STE Resistive Level Probe Specification

Electrodes Up to 5 rods, AISI 316 L (Titanium in option)
Fitting PP or AISI 316
Head housing PBT glass fiber reinforced,
IP 65 (EN 60 529), cable gland M20 x 1
Option: Partial insulation Polyolefin (heat schrinkable)
To avoid false alarms by conductive bridge through the
medium between electrodes or if the electrodes are
long and can touch each others.
Temperature limits Ambient: -20 … +60 °C
Liquid: -5 … +100 °C (restrictions apply according the
Pressure limits 6 bar at +20 °C
1 bar at 100 °C
Other pressure limits: On request
Min. L1 & L2 45 mm
Max. L1 … L5 2000 mm
Installation Vertical on top of tank; Never install horizontally

Download Data Sheet: Resistive Level Probe STE


%d bloggers like this: