Bamo MAXITOP Level Compact Overfill Detector is designed to prevent the overfilling of tanks. It detects conductive liquids (acids, alkalis) with a reactance below 5 kOhm and a coupling capacitance towards the ground of more than 50 pF. In no case should liquids form insulating or conductive deposits.
Bamo MAXITOP Features
- Wet parts in plastic materials
- For aggressive and conductive liquids
- Fail-safe; Auto-diagnostic with SHR relay
- Fitting: Adjustable depth
The MAXITOP has 4 different possible interfacing connections
- Direct connection to a 4 channels alarm unit MAXIMAT TC4 or 1 channel unit MAXIMAT TC1
- Direct connection to a PLC
- For relay output and loop diagnostic with a MAXIMAT SHR
- For relay output with a MAXIMAT CST
Application
The MAXITOP monitors the overfilling of a tank with electrically conductive, non-flammable liquids, even highly aggressive liquids. ExampleBamo Level Compact Overfill Detector MAXITOP: Storage tanks for caustic soda (NaOH), hydrochloric acid (HCl), etc.
Bamo MAXITOP Specification
Power supply | 15 … 27 V DC |
Consumption | < 1 W |
Ambient temperature | -20 … +60 °C |
Operating pressure | Atmospheric 0.8 to 1.1 bar |
Stem | HD-PE, O.D. 40 mm |
Fitting | PVC, BSP 2”, sliding coupling for depth adjustment |
Trigger point distances (L) | L Max.: or 500 mm or 700 mm or 900 mm |
Other lengths | On request |
Head housing | PBT, fibreglass reinforced, |
IP 65 according EN 60 529 | |
Connectors | Screw terminals, wire Max. 2.5 mm² |
Input | For external button switch to test the complete system |
Signaling display | Green LED on the terminals board |
Output | Reed contact, potential free, for low voltage |
Rated: 50 V AC/DC; 0.5 A; 10 VA |
Download Data Sheet: Level Compact Overfill Detector MAXITOP
Ref: bamo.eu
Another Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor