General
Bamo GAD 531 Level Detection are designed for monitoring grease-water separators. The probe GP/10 detects when the thickness of floating greases over water, is greater than the permitted max. thickness. The alarm unit has an auto-diagnostic of system integrity. A relay output and an audible alarm inform the operator. The buzzer may be deactivated with a simple jumper if necessary.
Bamo GAD 531 Level Detection Features
- Monitoring of grease-water separators
- Compact and economical model
- Detection of grease layer thickness over-passed
- Relay output; Changeover contact
- LEDs signals and audible alarm
Components of one system:
- Alarm unit GAD 531
- Detector: Probe GP/10 (cable output, 10 m long)
Caution: Not suitable for the detection of greases in emulsion, or greases cured in aggregate!
Application
Alarm unit for monitoring of grease separators in conformity with EN 1825.
Bamo GAD Level Detection 531 Specification
| Main power supply | 230 V AC +/- 10 % ; 50/60Hz |
| Power consumption | ~2 W |
| Housing protection | IP65, according EN 60529 |
| Operating temperature | -20 … +60 °C |
| Monitoring | The device has an auto-diagnostic of measuring loop integrity (broken cable, short-circuit) |
| Signals and alarm | Audible alarm (Buzzer) |
| Green LED for normal status | |
| Yellow LED when alarm occurred and not yet reset | |
| Red LED for alarming status | |
| Control | Through 1 push button for diagnostic test and alarm acknowledgement |
| Relay output | 1 Relay, 230 V AC, 3 A |
| Changeover contact; Potential free | |
| Cabinet | Housing: Polycarbonate; 120x80x55 mm; IP 65; Wall mounting |
Download Data Sheet: Level Detection for Grease-Water Separators GAD 531
Ref: bamo.eu
Other Article:
- Differential Pressure Flow Meter
- Bamo ES 5000 Relay for Resistive Level Detection
- Alpha Omega Instruments Series 3000 Trace Oxygen Analyzer
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor