Magnetrol Atlas Magnetic Level Indicators are produced in a wide range of materials, including exotic alloys and plastics. We also offer the most complete selection of process connection types and sizes in the industry.
ATLAS can be equipped with a variety of level transmitters and switches as well as flag and shuttle indicators with or without stainless steel scales. This enables the ATLAS to be a complete level and monitoring control.
Magnetrol Atlas Magnetic Level Indicator Features
- Numerous chamber styles (or configurations) are available for each design. Consult factory for choices not listed in this bulletin
- Complete range of level switches and level transmitters.
- Fabricated, non-magnetic chamber assembly produced in a wide range of metal and plastic materials
- A wide range of process connections is available
- Precision-manufactured float with internal magnets and magnetic flux ring
- ASME and EN 1092-1 process connections available
- Flag or shuttle-type indicator with stainless steel scale to measure height or percentage of level
- Standard float stop springs at top and bottom of the chamber
- Exceptional code-qualified welding
Magnetrol Atlas Magnetic Level Indicator Specifications
- Design: Single chamber
- Materials of construction
- Chamber Metal alloys: see selection table digit 5
- Rail & window:
- 316 stainless steel (reveal™) rail with polycarbonate window
- Aluminum rail with polycarbonate or glass window
- Float 316 stainless steel and titanium (exotic alloys available); varies depending on process conditions
- Construction options: ASME B31.1, ASME B31.3, ASME code Stamp [U, Um, S], PED and NACE
- Approvals: Industrial, Industrial PED: ATEX II 1 G c T6 (non-electrical equipment)
- Certified material test report (CMTR): Available upon request
- Pressure class ratings:
- ASME 150#, 300#, 600#, 900#, 1500#, 2500#
- EN PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320
- Process connection sizes:
- 1/2″ to 6″
- DN 15 to DN 150
- Process connection types: Refer to page 12 for detail
- Measuring range: 30 cm to 1524 cm (12″ to 600″)
- Temperature range: -196 °C to +538 °C (-320 °F to +1000 °F)
- Pressure range: Full vacuum to 310 bar (4500 psi)
- Specific gravity range: Min 0,25
- Visual Indicators:
- Magnetically actuated flag assembly in contrasting orange/black, yellow/black,
- red/white colors, or high visibility shuttle follower (custom colors available)
- REVEAL™ flag assembly seal: Vacuum and seal with double D-ring & InstaSeal™ valve
- REVEAL™ visual indicator Visible from 60 m (200′)
- Aluminum visual indicator: Visible from 30 m (100′)
- Scale options: Etched stainless steel with either height or percentage units (custom markings available)
- Switch options:
- Electric microswitch
- Electric reed switch
- Transmitter options:
- Model JM4 Jupiter magnetostrictive (refer to Magnetrol bulletin: BE 46-148)
- Analog reed chain transmitter
- High-temperature options: Electric or steam tracing with or without special high temperature insulation
- High-temperature insulation: Fibreglass material
- Low-temperature options: Cryogenic insulation with special polymeric frost extension
Download Datasheet: Magnetrol Atlas™ Magnetic Level Indicator
Reference: magnetrol.com
Another Article:
- Magnetrol Level Control
- Pulsar Continuous Level and Volume Measurement
- Hengesbach Level Module for Installation in Level Probes Type NM
- Industrial Controller MCU 200 Series
- Kobold PSR and PSE Paddle Switch