Mechatronics Dizzi Fluid Level Sensor are used for non-contact measurement ( “without insertion” ) of the liquid level (acoustically transparent media). Level measurement is performed by echolocation through the bottom of the tank.
Mechatronics Dizzi Fluid Level Sensor Key Benefits
- No change in tank design required. All sensor elements are located outside the tank, which is especially important when monitoring aggressive, explosive, sterile fluids, as well as fluids under high pressure
- Level measurement of almost any liquid, including liquefied gas
- Built-in self-diagnosis algorithm ensures data reliability
- Explosion protection marking ( 0Ex ia IIC T6 Ga, [Ex ia Ga] IIC )
Characteristic
Supply voltage | 9 – 30 |
The thickness of the translucent wall of the tank, mm | 0 – 5 |
Resolution (at rest), mm | 0.1 |
Reverse polarity protection | there is |
Temperature range, ° C | -40 – +85 |
Output interface | RS-485 |
Digital protocols | LLS, Modbus |
Degree of protection | IP 67 |
Eurosens Dizzi Ultrasonic Level Meter : Download Descriptions
Another Article:
- Pulsar Ultra 4 Ultrasonic Level Control and Flow Measurement
- Ultra 5 Pulsar’s Non-contacting Ultrasonic Level Control
- AW-Lake SRZ Ultra High Resolution Helical Gear Flow Meter
- McCROMETER Ultra Mag Electromagnetic Flow Meter
- Pulsar Ultra 3 Ultrasonic Measurement
- Energoflow AG DF Doppler Flow Meter with Clamp-on Sensors