Microsensorcorp MPM489WZ3 Submersible Level Transmitter

Microsensorcorp MPM489WZ3 Submersible Level Transmitter

Microsensorcorp MPM489WZ3 Submersible Level Transmitter uses a high-performance pressure sensor as a sensing element, It could measure liquid static pressure that is positively proportional to level depth precisely, and transform pressure signal into standard current/voltage signal output by amplifier circuit to measure accurate level depth.

The product has high accuracy, compact size, easy installation, can be submersible into the liquid directly to measure level and media temperature from transmitter bottom to the liquid surface. It can be widely used for water and other liquid level measurement and control in fields of petroleum, chemical industry, power station, city water supply, and drainage and hydrology, etc

Microsensorcorp MPM489WZ3 Features

  • Fully sealed stainless steel construction for the submersible part; sensor and amplifier circuit are all in the sealed stainless steel housing; IP68 Protection;
  • The water-proof connection box is recommended; install it in a place easy for electric connection; IP65 Protection;
  • Removable top Nylon cap; prevent the diaphragm from damage and easy for cleaning;
  • Compact size: Φ22

Another Article:

Specifications

Pressure Range 1m, 2m, 5m, 7m H2O
Overpressure 1.5 times FS
Accuracy ±1%FS
Stability error ±0.5% FS/ year
Transmitting 2-wire 3-wire
Power Supply 11V~28V DC 11V~28V DC
Output Signal 4mA~20mA DC 0.5V~4.5V DC
Load (Ω) < (U-11)/0.02 > 100k
 

 

Material contacting

with media

Housing: stainless steel

304

Seal parts: Viton
Diaphragm: SS 316L Cable: Φ7.5mm PUR cable with vent tube
Cap: Nylon Rubber casing: Chloroprene Rubber
Operation temp. -20℃ ~60℃
Compensated Temp. 0℃ ~50℃
Storage Temp. -20℃ ~70℃
Protection IP68 (sensor part) IP65 (connection box)

Notes

  1. Please be sure the measured media is compatible with contacting material; please pay attention to media density in the measurement (except water);
  2. If the output signal is a voltage signal, if you want to receive the temperature signal, select “T” in the product specification.
  3. If the product is installed in the “lightning and thunder” area, please note “lightning-proof” in the order. We suggest installing a Lightning-proof Protection Device to protect the transmitter. Please be sure good grounding as well;
  4. If the user has a special requirement, please feel free to contact our

Download Datasheet: MPM489WZ3, Microsensorcorp-Submersible Level Transmitter

Ref: Microsensorcorp.com

Share