BAMOSONIC is a high performance ultrasonic compact sensor with integrated transducer. This high reliable sensor is supplied by the 4-20 mA loop. Installed on the tank roof, or above the liquid surface to be measured, the transmitters give analogue output proportional to liquid level
BAMOSONIC is recommended for liquid level measurement in sumps or tanks, for tank contents measurement, or open channel flow measurement Four keys provide for programming With the help of the N-DIS plug-in display a full-parameter programming can be accomplished, the parameters of measurement and output can be set using the alphanumeric display module.
Features
- Measuring range from 0.2 to 8 m (liquids)
- Non-contact level measurement
- Power supply by 4-20 mA Loop
- IP67 Ingress protection
- Option : Plug-in display
Application
BAMOSONIC measures continuously the level of liquid in a tank, without contact with the liquid.
- Storage tanks
- Weirs and open channels
- Waste water lifting units
Another Article: |
Specification
| Transducer material | PP (Polypropylene) |
| PVDF (Polyvinylidene fluoride) | |
| Housing | Plastic PBT |
| Medium temperature | -30°C … +90°C |
| Ambient temperature | -25°C … +70°C |
| Pressure* | 0.5 … 3 bar (abs.) |
| Sealing | EPDM (PP model) |
| FPM (PVDF model) | |
| Ingress protection | Transducer IP 68 – Housing IP67 |
| Accuracy | ± (0,2% of measured distance + 0,05% of range) |
| Under optimal operating conditions and stabilized | |
| temperature | |
| Resolution | Depending on the measured distance |
| < 2 m : 1 mm; 2…5 m : 2 mm; 5…8 m : 5 mm | |
| Full beam angle | Between 5 et 7° |
| Power supply | 12…36 V DC / 48 …720 mW |
| Output | Analogue 4-20 mA |
| Electrical connection | 2 x M20 x 1.5 and 2x ½” NPT |
| Cable : Ø6…Ø12 mm | |
| wire cross section: max.1.5 mm² | |
| Electrical protection | Class III |
Download Data Sheet: Ultrasonic Level Transmitter for Liquids BAMOSONIC
Ref: bamo.eu