Bamo BR Metallic Flow Controller controls the flow-rate in a vertical pipe with ascending flow; the Liquid must be free of particles. These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.
The setting of the trigger point is possible over the entire measuring range. The actual flow-rate can be greater than the high range without damaging the device (it results in a higher pressure drop). These controllers must be installed far from any magnetic induction.
Bamo BR Metallic Flow Controller Features :
- Vertical mounting
- 1 adjustable contact
- Material: stainless steel or brass
- Pressure limit: up to 300 bar
- Flow ranges within 0.1 … 50 l/min
Application:
Control of flow in cooling, lubricating piping systems, or in any compatible skids.
|
Another Article: |
Bamo BR Metallic Flow Controller Specification:
| Temperature limits | -20 … +100 °C (On request: 160 °C) |
| Flow Ranges | l/min (of water at 20 °C) |
| Accuracy | ±5%F.S. |
| Contact type | N.O. (without flow) |
| Protection | Contact: IP 65 |
| Connection | DIN 43650 plug-in socket, cable gland PE 9 |
| Brass version | |
| Pressure limit | 200 bar |
| Body | Nickel-plated brass |
| Fittings | Nickel-plated brass |
| Diver | Nickel-plated brass |
| Seals | NBR (On request: FPM or EPDM) |
| Stainless steel version | |
| Pressure limit | 300 bar |
| Body | AISI 316 Ti (1.4571) |
| Fittings | AISI 316 Ti (1.4571) |
| Diver | AISI 316 Ti (1.4571) |
| Seals | FPM (On request: NBR or EPDM) |
Download Data Sheet: Metallic Flow Controller BR
Ref: bamo.eu