Electromechanical DELTA and its brand Deltapumps and Elektrogas are leading manufacturers of gear oil pumps and safety control valves, exported in more than 60 countries in the world. The study of innovative solutions and the application of new technologies make it possible for continuous improvement of the complete range of products and, in many cases, an increase in their performance.
The automation of the production and the assembly lines have been planned following a “Just in Time” philosophy, permitting Delta-Elektrogas to follow a global and flexible Management of the complete production system. In this way, it has been possible to answer in a very short time the Diverse and Specific requirements of the product. Gas Solenoid Valve
The experimentation of the new technical solutions and the very stringent reliability tests which every new product is subjected to, guarantee the safety and the quality of all products introduced into the market.
The use of highly advanced machines and specialised equipment, together with the employees’ expertise, are essential requirements to execute high precision machining which is subjected to very strict dimensional tolerances.
The awareness that the total quality depends on every single aspect, has focussed our attention to implementing the strict control procedures, to guarantee the conformity of every single component, to the project’s requirements.
This approach has been made possible due to continuous investments in the renewal of the Production Equipment and the Testing and Measuring systems.
Our Quality System has been accredited to the international standard ISO 9001 and our Products approved by the relevant International Certification Bodies. These are the final guarantees of a high quality standard.
Elektrogas Valve Product
Automatic Safety Valves
Elektrogas VMR VMR60 Safety solenoid valves
Safety solenoid valves for air and gas, fast opening and fast closing type The VMR type valve is a fast opening solenoid valve that is normally closed. When the coil is not energized the spring works on the disc keeping the gas passage closed. When the coil is powered the valve opens. When power is switched off the […]
Elektrogas VML VML60 Safety solenoid valves
Safety solenoid valves for air and gas slow opening and fast closing The VML type valve is a safety valve that is normally closed, with fast or slow opening and adjustable rapid section for initial gas flow. When not in working position the spring works on the disc keeping the gas passage closed. When the coil is powered […]
Elektrogas VMH Safety shut off valves
Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic actuator. It is suitable for gas blocking and releasing controls, as required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns and […]
Elektrogas VMM Multiple safety solenoid valve
Multiple safety solenoid valve for gas regulating trains The VMM type valve is a combination of two valves in an only compact and versatile valve housing. The first valve is a fast opening safety solenoid valve. The second valve may be a fast opening or a slow opening solenoid valve to adjust the gas flow, […]
Elektrogas VMRNA Automatic vent valves
Automatic vent valves for gas appliances VMRNA type is an automatic vent valve for gas appliances. It is suitable for discharging gas excess or gas leakage into relief lines. VMRNA valve is a reverse acting solenoid valve: when deenergized, the valve is open (N.O. normally open). VMRNA valve can be integrated in Elektrogas VMM multiple […]
Elektrogas Manual Reset Safety Valves
Elektrogas EVRMNC EVRM6NC Safety solenoid valves
Safety solenoid valves for gas with manual reset, normally closed The EVRM-NC type valve is a manual reset safety valve that is normally closed. When the coil is not energized the spring works on the shutter keeping the gas passage closed. Simply by energizing the coil the valve does not open. It is necessary to manually […]
Elektrogas EVRMNA EVRM6NA manual reset safety valve
The EVRM-NA type valve is a manual reset safety valve that is normally open. A manual operation is therefore necessary to open the valve and set the mechanism consenting to maintain this state. The powering by means of line current and/or condenser discharge, induced by the leakage detector, causes tripping of the mechanism and consequent […]
Elektrogas Control Valves
Elektrogas LMV Linear modulating valves
VF VFT VFH Butterfly valves
Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using a lever (to setup the high-fire rate of the burner) or automatically using a servomotor (modulating or staged control) or a solenoid actuator (two-stage control). The setting […]
Elektrogas VRA VLA VTA Solenoid valves
Solenoid valves for combustion air regulation The VRA/VLA/VTA types are normally closed solenoid valves for cold combustion air regulation. When the coil is not energized the spring works on the disc, keeping the adjusted minimum passage of air. When powering the coil the valve opens, moving the disc to the maximum open position. When power […]
Elektrogas SR SL ST Solenoid actuator valves
Elektrogas MZ Servomotor for control valves
Servomotor for control valves Servomotors MZ are designed to operate VF, VFT and VFH butterfly valves and LMV linear modulating valves. MZ2 and MZ3 types are suitable for basic adjusting position, operated by cams connected to driving shaft. MZ5 type is suitable for advanced adjusting position, controlled by analogue signals with very high positioning precision. MZ5 […]
Elektrogas Gas Regulation
Elektrogas R-RS -125 pressure gas regulators
Elektrogas VS Pressure relief valves
Elektrogas R-RF Gas pressure regulators
Elektrogas RAG Gas pressure regulators
Elektrogas RFS Gas pressure regulators
Elektrogas Valve Proving Systems
Elektrogas LD LDM tightness control
Elektrogas FG Gas filters
Gas filters Filters for gas pipelines with very high holding capacity of dust and impurities, suitable for protection of devices installed downstream. The filter cartridge is a steel supported frame covered with a high performance nonwoven made of polypropylene fibres, which satisfy the stringent requirements of Fire Class F1 according to DIN
Elektrogas CFK Burner control system
Burner control system CFK burner control system is a device that ignites and monitor the flame in the industrial gas burners with continuous service, with self-test function of the detection circuit. CFK is available with single control or double control for valves. Flame detection can be done via a single rod, two rods or UV […]
Elektrogas CPT Quanto Gas meters
Elektrogas VSG globe valve for gas
Elektrogas PCS mechanically switch
Elektrogas PSG 901 Pressure Switch
Elektrogas MG Pressure gauges
Pressure gauges for Gas MG pressure gauges are robust instrument suitable for fast measurement on site. MG are available with display dimension Ø63, Ø80 and Ø100. A button valve type ME can be installed to prevent damages due to pressure surges.
Contact us : firstname.lastname@example.org or visit to our E-Commerce
- Delta Elektrogas – VMRNA Automatic Vent Valve for Gas
- Elektrogas VMR60 Solenoid gas control valve
- Delta Elektrogas LMV Linear Control Valve
- Delta Elektrogas R-RS -100 Medium Pressure Gas Regulators
- Delta Elektrogas EVRMNC EVRM6NC Safety Valve For gas
- Delta Elektrogas VML Safety Solenoid Valve For Gas
- VM2V S4 Bamo Manually Operated 2-Way Ball Valves
- VM2V M1 Bamo Manually Operated 2-Way Ball Valves
- Delta Elektrogas Combustion Safety and Control
- Delta Elektrogas LD, LDM Tightness Control Device
- Delta Elektrogas RAG Gas Pressure Regulators
- Delta Elektrogas RFS Gas Pressure Regulators
- Delta Elektrogas VMM Multiple Safety Solenoid Valve
You must be logged in to post a comment.