AW-Lake TA3 Sanitary Turbine Flow Meter

AW-Lake TA3 Sanitary Turbine Flow Meter are constructed of 316 stainless steel for a durable and economic flow metering in sanitary environments. This meter is 3-A Sanitary Standard Authorized as all materials and polishing technologies utilized during manufacturing on internal components comply with FDA requirements.

n service around the world in sanitary industries including dairy, brewing, food processing and pharmaceutical processing. This meter is available in nine different flow ranges from 0.6 to 400 gallons/day, and can withstand system pressures up to 20,000 psi.

This 3-A Sanitary Standard Authorized turbine flow meter is used in plants around the world, in industries including dairy, brewing, wine production, food processing and pharmaceuticals.

AW-Lake TA3 Sanitary Turbine Flow Meter Features:

  • Sanitary Standards: Conforms to 3-A Sanitary Standards
  • Measuring Accuracy: ±1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
  • 9 Flow Ranges: 0.6 to 400 GPM
  • Pressure Rating: up to 1,000 PSI
  • Temperature Rating: -150˚ to 300˚F (-100˚ to 149˚C)

Advantages:

  1. Durable & Cost Effective: This meter’s rugged 316 stainless steel construction provides a durable and economic flow metering solution to sanitary environments.
  2. Excellent Accuracy: The TA3 sanitary turbine flow meter can achieve a flow accuracy up to 1.0% of reading and is repeatable up to 0.1%.
  3. Federal Compliance: The most up-to-date polishing technology is utilized during manufacturing on all internal components, and all materials comply with FDA requirements.
  4. Flexible: This meter is available in nine different flow ranges, covering flows from 0.6 GPM up to 400 GPM.
  5. Versatile: This flow meter provides local flow rate and volume totalization and will interface with most displays, controllers and computers.

Another Article:

AW-Lake TA3 Sanitary Turbine Flow Meter Specification:

  • Measuring Accuracy: ± 1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
  • Repeatability: ± 0.1%
  • Flow Measuring Range:
    • .6 to 3
    • .75 to 7.5
    • .75 to 7.5
    • 2 to 15
    • 3 to 30
    • 5 to 50
    • 15 to 180
    • 40 to 400
  • Turn Down Ratio: 10:1
  • Maximum Operating Pressure: 1000 psi (sanitary clamp rated at 250 psi at 300°F)
  • Maximum Operating Temperature: Fluid temperature up to 300°F
  • Electrical Connection: NEMA 6 Connector
  • End Connection: Tri-clamp
  • Materials Of Construction:
    • Body:  316L Stainless Steel
    • Rotor Support:  316L Stainless Steel
    • Rotor:  Nickel Plated Stainless Steel
    • Bearings:  Nickel Bindery Tungsten Carbide

Download Data Sheet: TA3 Sanitary Turbine Flow Meter

Ref: aw-lake.com

Share
%d bloggers like this: