Flux FMJ 100 nutating disc Flow Meter

Flux FMJ 100 Flow Meter work on the nutating disc principle. Here, the liquid flow actuates the nutating disc. With a Reed sensor the number of rotations is counted and forwarded as an impulse or passed on to the evaluation unit FLUXTRONIC®. This calculates the flow quantity of the fluid based on the previously entered, medium dependent calibrating constant.

Flux FMJ 100 Flow Meter Features:

  • Nutating disc principle
  • For low viscosity media
  • High measuring accuracy
  • Easy calibration
  • Reliable operation
  • No mains connections required
  • Signal transmission to evaluation unit FLUXTRONIC® or external control unit such as PLC possible
  • Version also available for hazardous area

Advantages:

  • Insensitive to small solids
  • Easy Handling
  • Easy  assembly on pump
  • Also for non-lubricating media
  • Battery acid, formic acid, ammonia, formic acid, boric acid, brake fluid, calcium chloride, ferric-III-chloride, photo developers, glycole, mineral oil, sodium hydroxide, phosphoric acid, hydrochloric acid, sulfuric acid to 60 %, tartaric acid, zinc chloride, citric acid

Another Article:

Specification:

  • Flow rate: min. 10 l/min – max. 100 l/min
  • Filling accuracy: +/- 1 %
  • Operating pressure: max. 4 bar
  • Size of solids: max. 1,5 mm
  • Viscosity: min. 1 mPas – max. 2500 mPas
  • Housing Materials: Polypropylene
  • Media / Fluids: Acids, Alkalis
  • Protection class: IP 54
  • Application area: For manual filling
  • Measurement error of the flow rate: +/- 1 %

Download Data Sheet: Flow Meter FMJ 100 Series

Ref: flux-pumps.com

Share
%d bloggers like this: