Katronic KATflow 170 Hazardous Area Ultrasonic Flowmeter

Overview

Katronic KATflow 170 provides a corrosion-resistant option as part of a fully ex-certified package for applications where harsh environmental conditions demand a more rugged instrument. The flowmeter is intended for permanent operation in Zone 1 and 2 hazardous areas and is an economical choice for a variety of metering applications. The KATflow 170 demonstrates that even the most complex technical requirements can be met with straightforward solutions.

The KATflow 170 flowmeter is designed around a choice of explosion-proof housings available in either offshore industry compliant epoxy-coated copper-free aluminium, or stainless steel. The instrument is extremely easy to use and is programmed with a magnetic pen and a glass-fronted keypad for increased safety. The robustness and reliability of the KATflow 170 is further enhanced by its encapsulated IP 68 transducers which are manufactured from stainless steel and have a sturdy cable conduit.

Katronic KATflow 170 Feature

  • Suitable for installation in hazardous areas
  • Dual flow monitoring with sum, average, difference and maximum calculations
  • IP 68 stainless steel sensors as standard
  • Process output options including current,open-collector, relay
  • Communication options RS 485, Modbus RTU,Profibus PA and HART* compatible output
  • ATEX-certified PT100 probe for temperaturecompensation

Application

  • Oil and Gas
    • Oil blending skids
    • Produced water measurements
    • Methanol and water injection systems
    • Product recognition and interface detection systems
    • Coiled tubing systems
  • Petrochemical
    • Measurement of refined products
    • Measurement of corrosive or toxic chemicals
    • Boiler feedwater measurements
  • Marine and Shipbuilding
    • Tanker unloading systems
    • Fire suppression systems
  • Water and Wastewater
    • Effluent measurement in hazardous areas
  • General Industry
    • Distillery process measurements
    • Automated process control
    • Production chemical measurements in hazardous areas

Specification

Flow velocity range 0.01 … 25 m/s
Resolution 0.25 mm/s
Repeatability 0.15 % of measured value, ±0.015 m/s
Accuracy Volume flow:
±1 … 3 % of measured value depending on application
±0.5 % of measured value with process calibration
Flow velocity (mean):
±0.5 % of measured value
Turn down ratio 1/100 (equivalent to 0.25 … 25 m/s)
Measurement rate 100 Hz (standard)
Response time 1 s (standard), 90 ms (optional)
Damping of displayed value 0 … 99 s (selectable by user)
Gaseous and solid content of liquid media < 10 % of volume
Power supply 100 … 240 V, AC 50/60 Hz
9 … 36 V DC
Temperature range -50 °C to +115 °C (-58 °F to +239 °F

Download : Datasheet Katronic KATflow 170

For futher info please contact us, sales@wmablog.com

Ref: https://www.katronic.com/

Other Article:

Share
%d bloggers like this: