KEM operates its own calibration laboratory certified according to DIN EN ISO/IEC 17025:2018. Here we intensively test each of our flowmeters before delivering it to the customer. In the course of effective support and after-sales service, our in-house calibration expertise allows us to meet changing customer requirements for the measuring equipment they are using even years later, offering an optimum solution.
KEM has modern CAD and FEM systems for design and simulation. High-precision production and great flexibility in realizing even unusual customer requirements set us apart from competitors. As an independent manufacturer, we control all design and production processes at all times thanks to our very extensive vertical integration. We deliver quality “Made in Germany” through considerable investments in development, design, and production.
KEM Küppers Elektromechanik GmbH was founded in 1965. We have been a flow measuring technology specialist ever since. Tailor-made products and solutions for challenging measuring tasks in all industry segments set us apart.
The helical flowmeter (SRZ) works according to the displacement principle. Two cycloidal helical spindles with geometrically lapped profiles that interlock with high precision lie in a cylindrical housing. This creates enclosed measuring chambers between the spindle profiles and the wall of the housing.
These transport the medium being measured. The medium is forcibly guided and flows through the measuring chamber bores in the axial direction, causing the spindles to rotate. This process is pulsation-free with minimum leakage. The rotational speed of the spindles is exactly proportional to the volume flow over a very wide range. Impulses per unit of volume are available for the analysis. Thanks to the minimal pressure loss and low shearing, the KEM helical flowmeter is especially well suited for measuring high-viscosity media.
- SRZ ST Series Kem Kuppers Helical Flow Meters : The SRZ ST helical flow meter series (tungsten carbide sleeve bearing design) are flow-measuring devices that are used mainly in high-viscosity, abrasive, filled as well as lubrication and non-lubrication media.
- SRZ KL Series Kem Kuppers Helical Flow Meters : The SRZ KL helical flow meter series (ball bearing design) are used mainly in highly viscous, not abrasive as well as lubrication media.
- SRZ Compact Series Kem Kuppers Helical Flow Meters : The SRZ Compact helical flow meter series are flow-measuring devices that are used mainly in high-viscosity, abrasive, filled as well as lubrication and non-lubrication media.
- SRZ High Resolution Series Kem Kuppers Helical Flow Meters : The High Resolution helical flow meter series is used mainly in applications with highly viscous, abrasive and filled, lubricating and non-lubricating media.