AW-Lake Nject Chemical Injection Flow Meter is specifically designed for chemical injection applications in onshore oil fields. Each Nject Chemical Injection Flow Meter is individually calibrated and shipped with a calibration certificate, and a completely sealed integral sensor keeps electronics safe from environmental forces. It produces high quality resolution and high accuracy (±0.5% of reading) at low flow rates making it an economical low flow meter for use in onshore chemical injection operations. Specifically Designed for Chemical Injection Applications in Onshore Oil Fields.
AW-Lake Nject Chemical Injection Flow Meter Features
- Assured Accuracy: Each flow meter is individually calibrated and shipped with a calibration certificate.
- Sealed Electronics: Completely sealed integral sensor keeps electronics safe from environmental forces.
- Economic Low Flow Meter: The meter produces good resolution and high accuracy at low flow rates, offering an affordable option for onshore chemical injection applications.
- Rugged Construction: The sturdy 316 stainless steel construction of this gear meter provides superior corrosion resistance and a longer service life.
- Fast Response Time: This meter can handle short pump shot times (<1 sec) and remain accurate.
Advantages:
- Assured Accuracy: Each flow meter is individually calibrated and shipped with a calibration certificate.
- Sealed Electronics: Completely sealed integral sensor keeps electronics safe from environmental forces.
- Economic Low Flow Meter: The meter produces good resolution and high accuracy at low flow rates, offering an affordable option for onshore chemical injection applications.
- Rugged Construction: The sturdy 316 stainless steel construction of this gear meter provides superior corrosion resistance and a longer service life.
- Fast Response Time: This meter can handle short pump shot times (<1 sec) and remain accurate.
AW-Lake Nject Chemical Injection Flow Meter Specification:
- Measuring Accuracy: ± 0.5%
- Repeatability: ± 0.1%
- Duty Cycle: Works with standard injection pumps from 50 to 200 gallons/day
- Maximum Operating Pressure: Up to 2,500 psi (172 bar)*
- Fluid Temperature Range: -40 to 175˚F
- Resolution: 100,000 pulses/gal
- Ports: 1/4” female NPT
- Weight: 3.9 lbs
- Filtration: 120 microns, 120 mesh
- Materials of Construction
-
- Body 316L Stainless Steel
- Gears Stainless Steel
- Bearing & Shaft Tungsten Carbide
- O-Ring PTFE
- Bolts 316 Stainless Steel
- Cable Gland Stainless Steel
Download Data Sheet: Nject Chemical Injection Flow Meter
Ref: aw-lake.com
Another Article:
You must be logged in to post a comment.