Kofloc 5100 Series High-Grade Mass Flow Controllers ≤±1%, the response of ≤±1 second, and other basic performance conditions required for semiconductor process control, and additionally, has achieved a significant price reduction.
Kofloc 5100 Series Features
- High accuracy and high response are achieved by the flow sensors with temperature- following current difference detection.
- A normally-closed solenoid valve is employed.
- A low leak rate is achieved by the weldless structure and metal seal.
- The dead volume is reduced thanks to the diaphragm seat valve.-
- The face-to-face and body dimensions and the wiring tie-in points are designed to facilitate the replacement of devices made by other companies.
- Flow range(N2 equivalents, 06 ℃/1 atm): 1 SCCM – 20 SLM (The conditions are freely selectable)
- Sensor: Thermal mass flow sensor
- Valve type: Proportional solenoid valve (closed when not energized)
- Control range: 2 – 100% (Porto)
- Response: 1 sec. or less (0 – 100% within ± 2% typical)
- Accuracy: ± 1% of Porto (Accuracy guaranteed at 15-35 ℃)
- Repeatability: ± 0.2% of Porto
- Operating differential pressure port:
* ≤ 5 SLM: 50 – 300 kPa
* Porto 5 > SLM: 100 – 1000 kPa
* Option: Low differential pressure (LP) specification is available depending on conditions.
- Allowable operating pressure: 300 kPa (G) or less
- Pressure-Proof: 980 kPa (G)
- Leak rate: 1 × 10-11 Pa • m3/s or less
- Allowable ambient temperature: 0-50 ℃
- Allowable ambient humidity: 10 & ndAsh; 90% (No condensation allowed)
Materials of the parts in contact with gases:
- Body: SUS316L
* Valve seat: PTFE
* Sealing: SUS316L, Ni, Au
* Option: SUS seal (SU), inner surface polish (KP)
- Electric connection: 9-pin Dsub connector as per Standard KFC (Compliant with SEMI Standard)
- Flow rate input signals: 0-5 VDC (Input impedance: 1 MΩ or more)
- Flow rate output signals: 0-5 VDC (External load resistance: 250 kΩ or more)
- Required power supply: +15 VDC (±5%) 100 mA, −15 VDC (±5%) 200 mA
- Joint (Main unit bore) : Standard: 1/4 VCR equivalent Option: 1/4 SWL
- Weight: Approx. 1000 g
- Kofloc Mass Flow Controller D8500 Series
- Kofloc RK1450 High Precision Flow Meter for Sensitive Measurement
- Kofloc RK120X Rotameter
- Kofloc RK120XM Series Flow Meter for Gas Mixing
- Bamo Needle Valve A 32
- Flow Control Valve Kofloc
- Kofloc Model 3760 Series
- Kofloc Back Pressure Valve Model 6801 Series
- Differential Pressure Flow Meter
- Kofloc Mass Flow Meter and Controllers
- Rotameter Kofloc RK1930/RK1935
- Kofloc CK Series Flow Setting Device Model