Bamo BAMONIV TPS Hydrostatic Level Transmitter is designed for hydrostatic level measurement in aggressive media that is clear or slightly contaminated. Wet parts are of PVDF or PP, the seal of FPM and the cable of FEP. It measures the level according to the principle of hydrostatic pressure measurement. The probe is suspended with its cable, down to the tank bottom. The probe is in immersion in the liquid and delivers a 4-20 mA signal proportional to the immersion depth.
Bamo BAMONIV TPS Hydrostatic Level Transmitter Features
- Level measurement of aggressive liquids
- Measuring cell: ceramic (99.9 %)
- Accuracy: 0.35 % (option: 0.25 %)
- Measuring ranges up to 50 m Water Column
- Body: PVDF or PP
Application
- Chemical industry
- Electroplating plants
- Waste water plants
- Neutralization process
Another Article: |
Bamo BAMONIV TPS Hydrostatic Level Transmitter Specification
| Power supply | 9…32VDC |
| Output signal | 4 … 20 mA; 2-wire |
| Current limit | 21 mA max. |
| Load limit | Rmax. = 450 Ω |
| Electrical protections | Against reversed polarity, short circuit |
| Accuracy | < ± 0.35 % F.S. – According IEC 60770 |
| Temperature limits | -25 … 100 °C (depends of configuration) |
| Temperature compensation | 0 … +70 °C |
| Temperature incidence | <±0.1%FS/10K |
| Response time | ≤ 0.2 s |
| Measuring cell | Ceramic AI₂O₃ 99.9 % |
| Measuring ranges | From 0…1 up to 0…50 m water column |
| (See the table” Codes and references”) | |
| Body | PVDF or PP |
| Seal | FPM (EPDM on request) |
| Cable | FEP (standard; Limits: -25 … 70 °C |
| PUR; Limits: -25 … 70 °C | |
| TPE; Limits: -25 … 100 °C | |
| Protection | IP 68 |
Download Data Sheet: Hydrostatic Level Transmitter BAMONIV TPS
Ref: bamo.eu