Magnetrol Atlas Magnetic Level Indicator

Magnetrol Atlas Magnetic Level Indicator are produced in a wide range of materials, including exotic alloys and plastics. We also offer the most complete selection of process connection types and sizes in the industry.

ATLAS can be equipped with a variety of level transmitters and switches as well as flag and shuttle indicators with or without stainless steel scales. This enables the ATLAS to be a complete level and monitoring control.

Magnetrol Atlas Magnetic Level Indicator Features

  • Numerous chamber styles (or configurations) are available for each design. Consult factory for choices not listed in this bulletin
  • Complete range of level switches and level transmitters.
  • Fabricated, non-magnetic chamber assembly produced in a wide range of metal and plastic materials
  • A wide range of process connections is available
  • Precision manufactured float with internal magnets and magnetic flux ring
  • ASME and EN 1092-1 process connections available
  • Flag or shuttle type indicator with stainless steel scale to measure height or percentage of level
  • Standard float stop springs at top and bottom of chamber
  • Exceptional code qualified welding

Magnetrol Atlas Magnetic Level Indicator Specifications

  • Design: Single chamber
  • Materials of construction
    • Chamber Metal alloys: see selection table digit 5
    • Rail & window:
      • 316 stainless steel (reveal™) rail with polycarbonate window
      • Aluminium rail with polycarbonate or glass window
    • Float 316 stainless steel and titanium (exotic alloys available); varies depending on process conditions
  • Construction options: ASME B31.1, ASME B31.3, ASME code Stamp [U, Um, S], PED and NACE
  • Approvals: Industrial, Industrial PED: ATEX II 1 G c T6 (non-electrical equipment)
  • Certified material test report (CMTR): Available upon request
  • Pressure class ratings:
    • ASME 150#, 300#, 600#, 900#, 1500#, 2500#
    • EN PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320
  • Process connection sizes:
    • 1/2″ to 6″
    • DN 15 to DN 150
  • Process connection types: Refer to page 12 for detail
  • Measuring range: 30 cm to 1524 cm (12″ to 600″)
  • Temperature range: -196 °C to +538 °C (-320 °F to +1000 °F)
  • Pressure range: Full vacuum to 310 bar (4500 psi)
  • Specific gravity range: Min 0,25
  • Visual Indicators:
    • Magnetically actuated flag assembly in contrasting orange/black, yellow/black,
    • red/white colours, or high visibility shuttle follower (custom colours available)
  • REVEAL™ flag assembly seal: Vacuum and sealed with double D-ring & InstaSeal™ valve
  • REVEAL™ visual indicator Visible from 60 m (200′)
  • Aluminum visual indicator: Visible from 30 m (100′)
  • Scale options: Etched stainless steel with either height or percentage units (custom markings available)
  • Switch options:
    • Electric microswitch
    • Electric reed switch
  • Transmitter options:
    • Model JM4 Jupiter magnetostrictive (refer to Magnetrol bulletin: BE 46-148)
    • Analog reed chain transmitter
  • High temperature options: Electric or steam tracing with or without special high temperature insulation
  • High temperature insulation: Fibreglass material
  • Low temperature options: Cryogenic insulation with special polymeric frost extension

Download Datasheet: Magnetrol Atlas™ Magnetic Level Indicator


 Another Article:

%d bloggers like this: