Series 02 motors from Linde Hydraulics are different from those common in the market. They are able to provide the required torque even at low speeds and make it possible to start smoothly and sensitively. Therefore, additional gear ratios for rpm reduction are not necessary.
This reduces the amout of parts going into the component and also increases the overall mechanical efficiency, minimizes windage losses as well as the noize level of the machine.
In addition to that the motors offer a PTO through drive due to their special design. They can provide torque at two shaft ends and can thus be integrated directly into the drivetrain. This saves a dropbox and thus installation space and costs.
With the next generation of the bent axis motors, Linde Hydraulics expands its customer oriented portfolio of highquality components for hydraulic systems. Due to their standardized interfaces, e.g. the plug-in flange according to ISO, the CMV and CMF fit a high variety of applications, without the need of adaptors. The motors enable a more cost effective operation of the respective applications thanks to low windage losses and lighter weight.
- axial piston motors in bent axis design for high pressure closed and open circuit systems
- standardized interfaces
- speed sensor optional
- high power density
- high speeds
- low windage losses
|Speed||Max. operating speed at Vmax||rpm||4450||3900||3550||3250||3100||2900|
|Max. speed at Vmax*||rpm||on request|
|Max. operating speed at Vmin||rpm||7200||6800||6150||5600||4900||4600|
|Max. speed at Vmin*||rpm||on request|
|Max. housing pressure||bar||2.5||2.5||2.5||2.5||2.5||2.5|
|Torque||Output torque ( p=430 bar and Vmax)||Nm||411||582||787||958||1163||1471|
|Corner power||(Vmax x nmax at Vmin x p 430 bar)||kW||191||238||293||336||378||447|
|Weight||approx. (without oil)||kg||27.7||36.3||44.8||59.2||62.1||76.4|