Floor Mounted Oil Removal Systems comes complete with:
- Oil Skimmer
- 30, 60, or 72-inch Frame Mount
- Sludge Pan
- Oil/Water Decanter
- Cover for Sludge Pan and Decanter
- Basic Control Panel (Skimmer Motor ON/OFF)
Available with the following options:
- Hi-Flow Oil Discharge Package (for thick oil or grease)
- Skimmer Heat (120V or 240V Heat Rod)
- Sludge Pan Heat (120V or 240V Heat Pad)
- Decanter Heat (120V or 240V Heat Rod)
- Insulated Weather & Wind Jacket
- *Epoxy Coating (Skimmer only or entire system)
- Ceramic Lined Tube Guards
- *Variable Frequency Drive (VFD) to control skimmer speed
- Explosion Proof motor and controller
- Control Panel Additions (Timer, Heat Control, Level Switches, etc.)
*Model 7V comes standard with Epoxy coating and Variable Frequency Drive.
Floor Frame Mounts were developed for the skimmer to be mounted at the edge of tanks, sumps, or pits to gravity drain collected oil into an above-ground collection tank (e.g. 55-gallon drum). Floor Frame Mounts provide for an easy, economical method of mounting the skimmer, and require minimal assembly.
The Guard Rail Mounted Oil Removal System comes complete with:
- Oil Skimmer
- Guard Rail Mounting Frame
- Sludge Pan
- Oil/Water Decanter
- Cover for Sludge Pan and Decanter
- Basic Control Panel (Skimmer Motor ON/OFF)
Available with the following options:
- Hi-Flow Oil Discharge Package (for thick oil or grease)
- Skimmer Heat (120V or 240V Heat Rod)
- Sludge Pan Heat (120V or 240V Heat Pad)
- Decanter Heat (120V or 240V Heat Rod)
- *Epoxy Coating (Skimmer only or entire system)
- Ceramic Lined Tube Guards
- *Variable Frequency Drive (VFD) to control skimmer speed
- Explosion Proof motor and controller
- Control Panel Additions (Timer, Heat Control, Level Switches, etc.)
*Model 7V comes standard with Epoxy coating and Variable Frequency Drive.
The Guard Rail Mounted Oil Removal System is ideal for efficient oil removal from ponds, sumps or pits with existing, sturdy guard rails. Mounting directly to the existing railing positions the skimmer out, over the water, but allows it to be swung back for servicing.
The skimmed oil drips from the skimmer into a sludge pan, then into the decanter to ensure no water remains, then gravity drains into a tote, 55-gallon drum, or another containment vessel.
The Wall Mounted Oil Removal System comes complete with:
- Oil Skimmer
- Wall Mounting Frame
- Sludge Pan
- Oil/Water Decanter
- Cover for Sludge Pan and Decanter
- Basic Control Panel (Skimmer Motor ON/OFF)
Available with the following options:
- Hi-Flow Oil Discharge Package (for thick oil or grease)
- Skimmer Heat (120V or 240V Heat Rod)
- Sludge Pan Heat (120V or 240V Heat Pad)
- Decanter Heat (120V or 240V Heat Rod)
- *Epoxy Coating (Skimmer only or entire system)
- Ceramic Lined Tube Guards
- *Variable Frequency Drive (VFD) to control skimmer speed
- Explosion Proof motor and controller
- Control Panel Additions (Timer, Heat Control, Level Switches, etc.)
*Model 7V comes standard with Epoxy coating and Variable Frequency Drive.
Where a high wall is present near the edge of a sump or pit, the wall-mounted system can be used for efficient and effective oil removal. The frame can easily be secured to the wall, positioning the skimmer directly above the contaminated water.
Similar to the other frame mounted systems, the oil is collected by the skimmer, falls into a sludge pan which feeds the decanting system. The oil moves from the decanter to the collection vessel. Can also be mounted on the inside wall as depicted here
Ref: Oilskimmer.com