Description
Bamo HygroWiz Relative Humidity and Temperature measures the temperature and relative humidity of the air. The temperature and humidity probe is integrated or cable connected to the housing. Standard version: the probe has a PTFE tap filter to limit the impact of water splashes (non-absorbent and anti-corrosion surface).
Choose the right version for your application, with remote signals, relay outputs, 4-20 mA signals, interface RS485 MODBUS protocol. Please, request more information when necessary. HygroWiz is available as a blind version, without display. For an easy start-up, HydroWiz is set up by ourselves before shipment, according to your needs (to list them on P.O.).
Bamo HygroWiz Relative Humidity and Temperature Features
- Local or remote display
- Analogue output(s) 4-20 mA
- Relay output(s)
- Interface RS485 with MODBUS RTU
Application
- For automation of HVAC network
- Storage areas, cool stores, greenhouses, animal husbandry
- Museums, Data centers, weather stations
Bamo HygroWiz Relative Humidity and Temperature Specification
Power supply | 24 V DC (11 … 36 V DC) – Consumption maxi 2.5 W |
Display | Backlit, graphic LCD – 128 x 64 pixels |
Ambient temperature | -20 … +70 °C (Version without display: -30 … +80 °C) |
Protection | IP 65 (Version without display: IP 67) |
Housing | Wall mounting |
Dimensions: 120 x 90 x 50 mm | |
Materials: ASA ( Luran® ) and polycarbonate | |
Probe for QM-212 model: | |
Type | Integrated to the display unit |
Dimensions | Height: 90 mm; O.D.: 18 mm |
Materials: | AISI 316 L; PTFE tap filter |
Temperature | -30 … +105 °C (±0,2 °C from 10 to 60 °C) |
±0.4 °C at 30 °C ; ±0.7 °C at 105 °C | |
Humidity | 0to 100 % RH (±1.8 % RH from 20 to 80 % RH at 25 °C) |
Probes for QM-612 model: | |
Type | Output cable, to connect to the housing |
Dimensions | Length: 90 mm; O.D. 18 mm |
Materials | AISI 316 L; PTFE tap filter |
Cable with PUR coating: Max. 80 °C; Or TPE: Max. 120 °C | |
Temperature | -40 … +120 °C (± 0.2 °C from 10 to 60 °C) |
( ±0.4 °C at -30 °C ; ±0.7 °C at 120 °C ) | |
Humidity | 0… 100 % RH ( ±1.8 % RH from 20 to 80 % RH at 25 °C ) |
Connections | Cable gland or connector type M12 – 4 pins |
Outputs (options): | 0, 1 or 2 relay outputs, N.O. |
Relay outputs | Rated: 24 V AC / 35 V DC, 200 mA |
Analogue outputs | 0, 1 or 2 outputs: 0/4-20 mA (0/24 mA max.) |
Active signal, no galvanic insulation | |
Interface | RS485; 8N1 & 8N2; 1,200 … 115,200 bit/s; MODBUS RTU; no galvanic insulation |
Download Data Sheet: Relative Humidity and Temperature HygroWiz
Reference: bamo.eu
Another Article:
- Humidity Temperature Transducer TE HTM2500LF
- AI- Tek RH Series Instruments Magnetic Hall Effect Sensors
- Kobold Flow, Humidity and Temperature Hand-Held Measuring Unit HND-F
- Greystone Energy Systems
- Flush-Mounted Pressure Transmitter TCS Type Hengesbach