Bamo APAQ-HRF Input for Pt 100 Ohm Sensors product that comes from temperature categories. And there is an input from this product such as Pt 100 Ohm and Resistor. And there is an output in this product such as 4-20 mA. Input for Pt 100 Ohm Sensors 4-20 mA Transmitter APAQ-HRF can be using for industrial.
Table of Contents
Bamo APAQ-HRF Input for Pt 100 Ohm Sensors Features
- Input: Pt 100 ohm and Resistor
- Configuration by welding strap
- Output: 4-20mA
Application
Transmitter APAQ-HRF is designed for input signal from Pt 100 Ohm at 0°C. According to its reliability it is performant for an industrial use.
|
Another Article: |
Bamo APAQ-HRF Input for Pt 100 Ohm Sensors Specification
| Input: | Pt 100 Ohm at 0°C, 3 wires connections |
| Range: | From 0…50 °C to 0…200°C |
| Fine adjustment: | ± 10% (in factory) |
| Zero offset: | -50 to +50 °C (in factory) |
| Output: | 4-20 mA |
| Linearity: | Output linear |
| Power supply: | 6.5 to 32 V DC |
| Line resistance: | Maxi R= U-6.5)/0.025 |
| Loop break detection: | High and low scale value |
| Ambient temperature: | -40…+85°C |
| Accuracy: | ± 0.15% of temperature scale |
| Mounting: | For industrial housing head DIN B (or larger) |
Ref: bamo.eu
Download Data Sheet: Input for Pt 100 Ohm Sensors 4-20 mA Transmitter APAQ-HRF
You must be logged in to post a comment.