E2FM Omron Proximity Sensor with All stainless Housing
Omron Proximity Sensor use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models.
E2FM Omron Proximity Sensor are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.
| Size Shielded Item Model | M8 | M12 | M18 | M30 | M12 | M18 | M30 | |
| Shielded | ||||||||
| E2FM-X1R5D1-@ | E2FM-X2D1-@ | E2FM-X5D1-@ | E2FM-X10D1-@ | E2FM-X2D1- M1T1GJ-T | E2FM-X5D1- M1T1GJ-T | E2FM-X10D1- M1T1GJ-T | ||
| Sensing distance | 1.5 mm±10% | 2 mm±10% | 5 mm±10% | 10 mm±10% | 2 mm±10% | 5 mm±10% | 10 mm±10% | |
| Set distance | 0 to 1.05 mm | 0 to 1.4 mm | 0 to 3.5 mm | 0 to 7 mm | 0 to 1.4 mm | 0 to 3.5 mm | 0 to 7 mm | |
| Differential travel | 15% max. of sensing distance | |||||||
| Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 7.) | |||||||
| Standard sensing object | Iron, 8 ´ 8 ´ 1 mm | Iron, 12 ´ 12 ´ 1 mm | Iron, 30 ´ 30 ´ 1 mm | Iron, 54 ´ 54 ´ 1 mm | Iron, 12 ´ 12 ´ 1 mm | Iron, 30 ´ 30 ´ 1 mm | Iron, 54 ´ 54 ´ 1 mm | |
| Response frequency *1 | 200 Hz | 100 Hz | 100 Hz | 50 Hz | 100 Hz | 100 Hz | 50 Hz | |
| Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | |||||||
| Leakage current | 0.8 mA max. | |||||||
| Output configuration | With polarity | No polarity | ||||||
| Control output | Switching capacity | 3 to 100 mA | ||||||
| Residual voltage | 3 V max. (Load current: 100 mA max., Cable length: 2 m) | 5 V max. (Load current: 100 mA max., Cable length: 2 m) | ||||||
| Indicators | Operation indicator (red LED), Setting/Operation indicator (green LED) | |||||||
| Operation mode (with sensing object approaching) | NO *2 | |||||||
| Protection circuits | Surge suppressor, Load short-circuit protection | |||||||
| Ambient temperature range | Operating/Storage: -25 to 70°C (with no icing or condensation) | |||||||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | |||||||
| Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C. | |||||||
| Voltage influence | ±1% max. of sensing distance at a rated voltage in the rated voltage ±15% range | |||||||
| Insulation resistance | 50 MÙ min. (at 500 VDC) between current-carrying parts and case | |||||||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | |||||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||||||
|
Shock resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions |
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||||||
| Degree of protection | IEC 60529 IP67 | |||||||
| Connection method | Unmarked: Pre-wired Models (Standard cable length: 2 m) Models ending with -M1GJ-@: Pre-wired Connector Models (Standard cable length: 300 mm) | |||||||
| Size Shielded Item Model | M8 | M12 | M18 | M30 | M12 | M18 | M30 | |
| Shielded | ||||||||
| E2FM-X1R5D1-@ | E2FM-X2D1-@ | E2FM-X5D1-@ | E2FM-X10D1-@ | E2FM-X2D1- M1T1GJ-T | E2FM-X5D1- M1T1GJ-T | E2FM-X10D1- M1T1GJ-T | ||
| Weight (packed state) | Pre-wired Models (2 m) | Approx. 105 g | Approx. 190 g | Approx. 215 g | Approx. 295 g | — | — | — |
| Pre-wired Connector Models | Approx. 65 g | Approx. 85 g | Approx. 110 g | Approx. 190 g | Approx. 85 g | Approx. 110 g | Approx. 190 g | |
|
Materi- als | Case | Stainless steel (SUS303) | ||||||
| Sensing surface (thickness) | Stainless steel (SUS303) | |||||||
| (0.4 mm) | (0.8 mm) | (0.8 mm) | ||||||
| Clamping nuts | Stainless steel (SUS303) | |||||||
| Cable | PVC (flame retardant) | |||||||
| Toothed washer | Zinc-plated iron | |||||||
| Accessories | Instruction manual | |||||||
*1. The response frequency of the DC switching section is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. NC (normally closed) models are also available. Contact your OMRON representative.
Download Catalog: Proximity Sensor with All-stainless Housing E2FM
Ref: Omron.com
Read more articles :
