Omron E2NC Smart Proximity Sensor Features
Omron E2NC Smart Proximity Sensor Series wide variety of Sensor Heads to select according to the application. Flexible cables are used between Preamplifiers and Amplifier Units of the Sensor Heads.
- High resistance to changes in ambient Temperature characteristics of 0.08%/°C
- Make simple and reliable detection settings with micron-level precision using the teaching
- Check the sensing excess gain level on the digital
- Support for high-precision positioning and screening with fine positioning to maximize
- The Model for Sensor Communications Units support an
Ratings and Specifications
Sensor Heads
| Model | E2NC-EDR6-F | E2NC-ED01(-@) | E2NC-ED02(-@) | E2NC-EM02(-@) | E2NC-EV05(-@) | E2NC-EM07M(-@) | E2NC-EM02H | |
| Item | 3 dia. × 18 mm | 5.4 dia. × 18 mm | 8 dia. × 22 mm | M10 × 22 mm | 30 × 14 × 4.8 mm | M18 × 46.3 mm | M12 × 22 mm | |
| Sensing Distances | 0.6 mm | 1 mm | 2 mm | 2 mm | 5 mm | 7 mm | 2 mm | |
| Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 7.) | |||||||
| 5 × 5 mm | 5 × 5 mm | 10 × 10 mm | 10 × 10 mm | 15 × 15 mm | 22 × 22 mm | 20 × 20 mm | ||
| Standard sensing object | Material: iron (t = 3, S50C) | |||||||
| Repeatability *1 | 1 mm | 1 mm | 2 mm | 2 mm | 2 mm | 5 mm | 2 mm | |
| Hysteresis distance | Variable | |||||||
| Temperature characteristics | Sensor Head | 0.3%/°C | 0.08%/°C | 0.08%/°C | 0.08%/°C | 0.04%/°C | 0.08%/°C | 0.2%/°C |
| *2 | Preamplifier and Amplifier | 0.08%/°C | ||||||
| -10°C to 200°C | ||||||||
| Ambient temperature range | Operating | -10°C to 60°C (with no icing or condensation) | (with no icing or condensation) | |||||
| *3 | *4 | |||||||
| -10°C to 60°C | ||||||||
| Storage | (with no icing or condensation) | -20°C to 70°C (with no icing or condensation) | ||||||
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |||||||
| Insulation resistance | 50 MÙ min. (at 500 VDC) | |||||||
| Dielectric strength | 1,000 VAC at 50/60 Hz for 1 min between current carry parts and case | |||||||
| Vibration resistance (destruction) | 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||||||
| Shock resistance (destruction) | 500 m/s2 for 3 times each in X, Y, and Z directions | |||||||
| Degree of protection (Sensor Head) | IEC60529 IP67 | IEC60529 IP60 | ||||||
| *5 | ||||||||
| Weight (packed state) *6 | Approx. 120 g | |||||||
| Sensor Head | Brass | SUS | Brass | Brass | Zinc | Brass | Brass | |
| Sensing surface | Heat-resistant ABS | PEEK | ||||||
| Clamping nut | — | Nickel-plated brass | — | Nickel-plated brass | ||||
| Toothed washer | — | Zinc-plated iron | — | Zinc-plated iron | ||||
| Materials | Preamplifier | PES | ||||||
| Connection method *7 | Connector (Standard models and models with Protective Spiral Tube: The standard cable length is 2.6 m, Free-cut models: The standard cable length is 3.6 m.) | |||||||
| Accessories | Instruction Manual, Mounting Brackets | |||||||
Ref: Omron.com
Other Article:
- Aplisens Hydrostatic Level Probe SGE-25/Hastelloy
- Aplisens Hydrostatic Level Probes SGE-25 and SGE-16
- Omron Industrial Automation
- Omron E2EY Alumunium Detecting Proximity Sensor
- Omron E2C-EDA High Precision Positioning Inductive Proximity Sensor
- Nivelco Microwave Radar Level Measurement
- Nivelco Level Switch
- Nivelco Industrial Sensor Process Control