E2S, Omron Super compact Proximity Sensor

E2S, Omron Super compact Proximity Sensor

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models.

Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

E2S, Omron-Super-compact Proximity Sensor
E2S, Omron-Super-compact Proximity Sensor

Features

  • Only 5.5 ´ 5 mm with a built-in Amplifier.
  • Maximum sensing distance: 5 mm. Stable detection even with workpiece fluctuations.
  • Response frequency: 1
  • Low current

Specifications

Item                    Model E2S-@@@
Protection circuits Reverse polarity protection, Surge suppressor
Ambient temperature range Operating: -25 to 70°C (with no icing or condensation), Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 90% (with no condensation), Storage: 35% to 95% (with no condensation)
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range
Insulation resistance 50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC for 1 min between current-carrying parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67
Connection method Pre-wired Models (Standard cable length: 1 m)
Weight (packed state) Approx. 10 g
Materials Case Polyarylate resin
Accessories Mounting Brackets

DC 2-Wire Models

Model

Item

E2S-W11 E2S-W12 E2S-Q11 E2S-Q12 E2S-W21 E2S-W22 E2S-Q21 E2S-Q22
Sensing surface Top Front Top Front
Sensing distance 1.6 mm ±15% 2.5 mm ±15%
Set distance 0 to 1.2 mm 0 to 1.9 mm
Differential travel 10% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Standard sensing object Iron, 12 ´ 12 ´ 1 mm Iron, 15 ´ 15 ´ 1 mm
Response frequency * 1 kHz min.
Power supply voltage (operating voltage range)  

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

Leakage current 0.8 mA max.
 

Control output

Load current 3 to 50 mA max.
Residual voltage 3 V max. (under load current of 50 mA with cable length of 1 m)
Indicators @@1 Models: Operation indicator (red), Setting indicator (green)

@@2 Models: Operation indicator (red)

Operation mode (with sensing object approaching) @@1 Models: NO

@@2 Models: NC                  Refer to the timing charts under I/O Circuit Diagrams on page 5 for details.

DC 3-Wire Models

Model

Item

E2S-W13 E2S-W14 E2S-Q13 E2S-Q14 E2S-W23 E2S-W24 E2S-Q23 E2S-Q24 E2S-W15 E2S-W16 E2S-Q15 E2S-Q16 E2S-W25 E2S-W26 E2S-Q25 E2S-Q26
Sensing surface Top Front Top Front Top Front Top Front
Sensing distance 1.6 mm ±15% 2.5 mm ±15% 1.6 mm ±15% 2.5 mm ±15%
Set distance 0 to 1.2 mm 0 to 1.9 mm 0 to 1.2 mm 0 to 1.9 mm
Differential travel 10% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Standard sensing object Iron, 12 ´ 12 ´ 1 mm Iron, 15 ´ 15 ´ 1 mm Iron, 12 ´ 12 ´ 1 mm Iron, 15 ´ 15 ´ 1 mm
Response frequency * 1 kHz min.
Power supply voltage (operating voltage range)  

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

Current consumption 13 mA max. at 24 VDC (no-load)
 

Control output

Load current NPN open-collector output, 50 mA max. (30 VDC max.) PNP open-collector output, 50 mA max. (30 VDC max.)
Residual voltage 1.0 V max. (under load current of 50 mA with cable length of 1 m)
Indicators Operation indicator (orange)
Operation mode (with sensing object approaching) @@3 Models: NO

@@4 Models: NC

Refer to the timing charts under I/O Circuit Diagrams on page 5 for details.

@@5 Models: NO

@@6 Models: NC

Refer to the timing charts under I/O Circuit Diagrams on page 5 for details.

Download Catalog: E2S, Omron-Super-compact Proximity Sensor

Ref: Omron.co.id

Share