Hengesbach HART® Head Temperature Transmitter TE 52

HART® Head Temperature Transmitter TE 52
HART® Head Temperature Transmitter TE 52

Hengesbach is a company from Deutschland. For more than 50 years Hengesbach develops, manufactures and distributes innovative measuring technology for applications in production processes where functionality, reliability and accuracy of the instruments are of highest priority even under extreme process conditions.

HART® Head Temperature Transmitter TE 52

The HART® head-temperature transmitter Type TE 52 is used for electronic sensing and conversion of various input signals for industrial temperature measurement with application areas such as measuring, control and regulating technology to control industrial processes. The HART® head-temperature transmitter is a 2-wire measuring transmitter with an analogue output for resistance thermometers in 2-, 3- or 4-wire circuits, for thermo-elements or voltage transmitters.

Setting or programming is performed with the HART® protocol using a hand-held device or aC with special programming and operating software. Additional benefits of the TE 52 are customer-specific linearisation, adaptation to characteristics as well as failure information in the event of a sensor breakage.

Features:

  • universally programmable with HART®protocol for Pt100, thermoelements and voltage transmitters
  • HART®-protocol for device control on site or from a control station with a hand-held device or pc
  • 2-wire technology, analogue output 4…20 mA
  • high accuracy in the whole measuring range
  • usable with all pt 100 design types
  • linearisation, adaptation to characteristics, galvanic separation

Another Article:

Specification:

11.5…35 V DC (standard),
Supply voltage Reverse polarity protected
Output 4…20mA / 20…4 mA, analog,
Impressed direct current
– Measuring underrange:
linear drop up to 3.8 mA
Breakdown signal – Measuring over range:
linear rise up to 20.5 mA
– Sensor breakage, sensor short
circuit </= 3,6 mA or >/= 21.0 mA
Working resistance max.( V supply -11.5 V) / 0.022 mA
Effect of the load ≤ ± 0.02 % / 100 Ω (on max. value of
measuring range)
Linearisation/ transmission Temperature linear, resistance
linear,
Behavior
voltage linear
Galvanic isolation U = 2 kV AC (input/output)
Power requirement ≤ 3.5 mA
Current limit ≤ 23.0 mA
Switch-on delay 4 s
Response time 1 s (TC), 1.5 s (Pt100)
Permissible environmental temperature -40…+85°C
Climate class Class C, acc. to EN 60654-1
Dewing permissible
Effect of voltage change ≤ +/- 0.01%/V of 24
Load resistance (Vref-10V) / 0.022 A
Measuring ranges: – Pt 100 Measuring limit ranges:
– acc. to type IEC 751 Measuring limit ranges:
Impact and vibration resistance 4g / 2… 150 HZ,
acc. to IEC 60 068-2-6
– 2-, 3- or 4- wire connenction
– Compensation of the of the line
Resistance thermometer resistance is possible (0 to 20 Ω)
– Sensor line resistance max.
11 Ω each line
– Sensor current: ≤ 0.6 mA
Accuracy: – Pt 100 0.2 K or 0.08 %
– acc. to type IEC 751 0.1 K or 0.08 %
Circuit type 2-wire technology
– Housing: PC
Material – Casting material: PUR
Thermal runaway 0.01%/K
Calibrating temperature 23°C±5K
Configurable start of range < 50% final value
Installation Cable conductors up to 1.75 mm²
Long-term stability ≤ ± 0.1 K / year
Type of protection IP66 installed / IP00
EMC compatibility acc. to. IEC 61326, NAMUR NE 21
CE conformity acc. to EN 61326-1,
Weight approx. 40 g

Download Data Sheet: HART® Head Temperature Transmitter TE 52

Ref: hengesbach.com

Be the first to comment