Bamo Pressure Measurement for Gauges is actuated instantaneously; the hysteresis is short, about 0.5%. They may not be use when there are vibrations on the process or with aggressive ambient conditions. They must be used in a dry (not filled) pressure gauge case.
Bamo Pressure Measurement for Gauges Application:
A pressure gauge with one or two contacts is an easy solution to have at the same time a permanent reading of process pressure with a survey of limit pressure over ranges. The pressure indication is done on a 100 mm or a 160 mm dial pressure gauge (up to 4 contacts). The contact is actuated as the pressure index come over.
Magnet Switches
They are suitable for most of applications, even with weak vibrations. The switch actuates with the help of a spring for a quick release. They must be used in a dry (not filled) pressure gauge case.
Inductive Switches
These switches do not have electrical contact, as per standard DIN 19234. They have a greater life than the magnet switches and a better accuracy. They can be used with silicone filled cases. The output signal reflects the location of the pressure index inside the magnetic field of the switch.
Bamo Pressure Measurement for Gauges Specification:
Nominal voltage: | 250 V, as a maximum |
Release or priming current: | 0.7 A as a maximum |
Load current: | 0.36 A as a maximum |
Switching power: | 10 W as a maximum |
Contacts: | Ag 80 / Ni 20 |
Accuracy: | 0.5% F.S |
Specification Magnet Switches:
Nominal voltage: | 250 V, as a maximum |
Release or priming current: | 1.0 A as a maximum |
Load current: | 0.6 A as a maximum |
Switching power: | 30 W as a maximum |
Contacts: | Ag 80 / Ni 20 |
Accuracy: | from 2 to 5% F.S. |
Specification Inductive Switches:
Load voltage: | 8 V DC (Ri =1 kOhm) as a maximum |
Nominal voltage: | 5 to 25 V |
Consumption: | > 3 mA (open circuit output) |
< 1 mA (closed circuit output) | |
Accuracy: | 0.5% F.S. |
Download Data Sheet: Pressure Switches for Gauges
Ref: bamo.eu
Another Article:
- LEEG Pressure Transmitter, Sensor and Switch
- D22 Pressure Transmitter Delta Mobrey
- 8000 SAN Pressure Transmitter Delta Mobrey
- Hengesbach Pressure Transmitter DME 11 Series
- Pressure Transmitter 8000 Series Delta Mobrey