Description
Hengesbach TP 12 Screw In-Resistance Thermometer with G ½ B – screw-in threads designed with or without a transmitter are high-performance, robust and all-purpose devices for general applications without special hygienic requirements.
The temperature sensor is a PT100 Platinum resistor, standardly designed in accuracy class A according to EN 60751. Accuracy classes B 1/2, 1/3, 1/10 DIN, or class B are available optionally. The measurement inserts consist of replaceable single- or double-PT100 resistors. The application of the measurement inserts has to be adjusted to the needs of temperature, length, flexibility, vibration-proofness, and measuring accuracy. E.g. for control processes and on-request devices with tapered tips and extra short half-life times are available.
Safety and profitability aspects advise constructions with protective tubes in case of a possibly necessary change of the probes so that replacements can be carried out quickly and comfortably, without decommissioning the plant or draining the tanks. Furthermore, the protective tube guarantees restiveness against mechanical stress and chemical attacks. Also, variants of protective tubes to be screwed in or welded can be designed for a quick response time.
The construction in protection class IP67 guarantees reliability for closeness and long durability even under extreme operating conditions. On longer transmission paths analog or programmable transmitters can be used optionally.
Hengesbach TP 12 Features:
- “FR”- housing in IP 67
- with single- or double- PT100
- CIP-proofed installation with metallic sealing system
- optional delivery with head transmitter
- construction with G1/2 B – screw-in thread with replaceable measurement devices
Specification:
Constructive Layout | ||
Housing | field housing | |
Temperature sensor | PT 100 acc. EN 60751, changeable measurement insert (standard), | insert tube 1.4571 |
Measurement insert, electrical | 1 x PT 100 in 2-, 3- or 4-wire connection, standard: 1 x 3-wire connection, | 2 x PT 100 in 2- or 3-wire connection |
Electrical connection | – M16 x 1,5 – cable gland, MS nickel-plated, | |
– optional: M12 x 1 circular connector, 4-pins | ||
Accuracy | – standard: tolerance class A acc. to EN 60751, | |
– optional: | tolerance class B 1/10, 1/5, 1/3, 1/2 | |
Response time | T50 (measured in water): 6 sec. (dependent on design, d = 6 mm) | < 4 sec. with tapered sensor tip on request |
Measured medium temperature | Tmax at sensor = -20… +200°C | |
Housing material | stainless steel 1.4301 (CrNiSt, standard-field housing) | |
Sensor material | stainless steel 1.4571, optional 316L = 1.4435 or 1.4404, | optional: enhanced surface quality |
Sensor diameter | standard: | continuously plain, d = 6 mm, |
optional: | tapered sensor tip, d = 4 mm | |
tapered sensor tip, d = 3 mm or 2 mm | ||
Sensor length | insertion length IL = 100 mm (standard) | |
Protection class | EN 60529, | IP 67 with cable gland, optional with cable connection |
Pressure admissible | PN = 10 bar, dependent on design and temperature | |
CE-conformity | EMC-rules are accomplished, CE-sign | |
Process Connection | TP12/TW39…T039 | G ½ B – screw-in thread with d = 6 mm |
TP12/TW39…T039 | G ½ B – screw-in thread with d = 9 mm | |
Accessories | ||
Assembly components | – zem / T327: | |
welded protection sleeve, d = 9 mm, 1.4571, by PN 40, | ||
acc. drawing no. 062164, for fitting lengths 25 mm…100 mm (lengths > 100 mm, on req.) | ||
– zem / TP12: | ||
screw-in protection sleeve, d = 9 mm or 11 mm, 1.4571, by PN 40, | ||
acc. drawing no. 05895, for fitting lengths 30 mm…100 mm | (lengths > 100 mm, on req.) | |
Options | ||
Electrical connection | ceramic connection socket | |
flexible connecting wires | ||
sheathed cable (shakeproof type) | ||
transmitter TE 42, programmable, 4…20 mA, 2- wire connection (standard) | ||
transmitter TE 41, programmable, galvanically isolated | ||
transmitter TE 52, HART | ||
transmitter TE 82, Profibus PA | ||
Calibration | factory calibrated, calibration certificate (3-point or 5-point), | with DKD-standard |
Certificates | material certificate, acc. to EN 10204, EHEDG, | FDA |
Accessories / Options (to be specified in plaintext)
- Transmitter (programmable), not galvanically isolated TE 4200
- Transmitter (programmable), galvanically isolated TE 4101
Transmitter (programmable), galvanically isolated EX TE 4111 EX - Transmitter HART TE 52
- Transmitter Profibus PA TE 82
- Configuration-Set incl. adapter and software for TE 41/42, TZ 41/42
- Tapered sensor tip, D = 3 mm or 4 mm
- Accuracy class 1/3 DIN B (per PT 100)
- Accuracy class 1/5 DIN B (per PT 100)
- Accuracy class 1/10 DIN B (per PT 100)
- Sheathed cable (shake-proof type)
- Calibration certificate DKD (approval by certified DKD laboratory)
- Measurement insert replaceable, d = 3 mm
- Neck tube L = 75 mm, d = 12 mm (other lengths to be specified)
- M12 x 1- connector, 4-pins
- Technology: resistance, Pt100, platinum
- Units of measurement°C: Communication4-20 mA
- Protection level: IP67
- Configurationscrew-in: Other characteristicshygienic
- Temperature: Max.: 200 °C (392 °F), Min.: -20 °C (-4 °F)
Accessories / Fittings
- (for ordering please specify)
- zem / T327
- Welded protection sleeve, d = 9mm,
- acc. drawing no. 062164, 1.4571, for fitting lengths 25 mm…100 mm
(lengths > 100 mm on request)
- zem / TP12
- screw-in protection sleeve, d = 9 mm or 11 mm,
- acc. drawing no. 05895, 1.4571, for fitting lengths 30 mm…100 mm
- (lengths > 100 mm on request)
- WZ 31 (3.1B)
Download Data Sheet: Screw In-Resistance Thermometer TP 12
Reference: hengesbach.com
Another Article:
- Space Resistance Thermometer TP 09 Hengesbach
- Digitemp Single Color Thermometers
- TX-600N Data-Logging Thermometer
- Resistance Thermometer TP-60 Hengesbach
- Resistance Thermometer TP 62 Hengesbach