Advanced Sensors WiO-300S Water Cut Analyzer

Description

Water Cut Analyzer WiO-300S is a Water Cut analyzer that measures the amount of water in oil to high levels of accuracy. Water Cut is also referred to as Water in Oil, BS&W, OWD, or WFM. The smart sensor technology uses a capacitive method to measure the percentage of water contained within the sample, with a large measurement range from a few 100ppms to 100% water.*

Water Cut Analyzer WiO-300S sensor is a spool section for in-line measurements from 1 to 8 inches. Sizes 1 to 3 inches are available with threaded connections.

Benefits

• Smart sensor, no need for a separate controller.
• Option to combine the Water Cut with Advanced Sensors Oil in Water Analysers.
• Low power consumption.
• Easy to use and install.
• Works in Bypass and in-line.
• ATEX or FM/UL Explosion Proof.

Water Cut Analyzer WiO-300S Specifications

Measurement Performance

• Measurement principle: Capacitance
• Range and accuracy*:
  • +/-0.01% up to 1% water cut
  • +/-0.05% up to 5% water cut
  • +/-0.1% from 5% to 10% water cut
  • +/-0.2% from 10% to 25% water cut
  • +/-0.5% from 25% to 65% or 100% (sweet water) water cut
• Resolution: 0.003%
• Response time: 1 sec
• Temperature Compensation: Yes

Operating Conditions

• Process temperature: 0-120°C standard version, 0-240°C high-temperature version
• Process pressure: Up to 100barg depending on flange rating
• Operational ambient temperature: -40 to +65°C

Utilities

• Water Cut Analyzer WiO-300S Power: 24VDC

Certification

• Ingress Protection: IP66/67 Nema 4X&7
• Water Cut Analyzer WiO-300S Certification:
  • IECEx: Ex db IIC T4 Gb | Ta= -20 to +60°C
  • CSA/UL: Class I Zone 1 AEx db IIC T6 Gb | Ex db IIC T4 Gb | Class I Division 1 Gr. ABCD T4/T5 | Ta= -20 to +60°C
  • ATEX: Ex II 2 G | Ex db IIC T4 Gb | Ta= -20 to +60°
• Pressure Certifications: PED (EU Zone) limited to size/pressure that falls within SEP

Weight & Dimensions (for shipping)

• Length:
  • WIO-300S: 1 inch: 220mm | 1.5 inch: 330mm | 2-8 inch: 430mm
  • WIO-300K: From 430mm
  • WIO-300P: Depends on the configuration
• Length with static mixer: Application dependent
• Insertion Port (WIO-300P): 2 or 3 inch
• Weight and full dimensions: Depends on the configuration. Please get in touch with Advanced Sensors about your application

Communications

• 4-20mA: Yes
• Hart: Yes

Additional Information

• Hot insertion/extraction: ANSI 150, ANSI 300, ANSI 600
• Wetted parts: SS316L, Duplex, Super Duplex, Hastelloy
• Enclosure material: SS316L or Aluminium

*Range will depend on operating conditions; in general, 0-65% for most applications and up to 100% for example sweet water. Please get in touch with Advanced Sensors to discuss your application needs.

Reference: advancedsensors.co.uk

Other Article:

• Advanced Sensors Ltd Instruments
• DB Delta Mobrey Pressure Gauge
• Temperature Gauge GB Series Delta Mobrey
• Pulsar Transducers
• Analytical Industries Trace Oxygen Analyzer: Sample Panel or Wall-mounted