Wenglor Retro K1R87PCT2 -Reflex Sensor for Clear Glass Recognation

A reflector must be used in combination with these sensors. wenglor has the right retro-reflex light barrier for every application. Even crystal-clear objects and sheet products can be reliably recognized. The sensor is easy to install with its integrated M18 threaded fixation and can be easily protected as well. Time delay can be activated by RS-232 interface.

Feature

  • Dynamic readjustment of the switching threshold
  • Recognition of clear glass
  • Simple installation
  • Teach-in, external teach-in

  Another Article:

Specification

Optical Data

Working Range 4000 mm
Reference Reflector/Reflector Foil RQ100BA
Clear Glass Recognition yes
Switching Hysteresis < 5 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Opening Angle
Single-Lens Optic Yes

Electrical Data

Supply Voltage 10…30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 1700 Hz
Response Time 250 µs
On-/Off-Delay (RS-232) 0…5 s
Temperature Drift < 5 %
Temperature Range -10…50 °C
Switching Output Voltage Drop < 2,5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Lockable yes
Teach Mode MT
Protection Class III

Mechanical Data

Setting Method Teach-In
Housing Material Plastic
Full Encapsulation yes
Degree of Protection IP67
Connection M12 × 1; 4-pin

Output

PNP NO/NC switchable yes
RS-232 with Adapterbox yes

Datasheet: Wenglor K1R87PCT2 Reflex Sensor

For more info and price please contact marketing@wmablog.com

Reference: wenglor.com