ELTRA’s ELEMENTRAC CS-d is the only analyzer in the market for determination of carbon and sulfur in organic as well as inorganic samples. For this purpose, the ELEMENTRAC CS-d is equipped with both an induction and a resistance furnace (ELTRA Dual Furnace Technology), covering the full range of carbon and sulfur analysis.
Up to four highly sensitive infrared (IR) cells allow for precise measurement of both high and low carbon and sulfur concentrations in only one analysis. The measuring range of each cell may be adapted to the user’s specific requirements to ensure optimum measurement conditions for each application.
The ELEMENTRAC CS-d is supplied with the comprehensive and user-friendly ELEMENTS software which features statistics, groupings, reports, diagnosis tools and many additional functions.
Alloys, ashes, carbides, cast iron, cement, ceramics, coal, coke, copper, glass, gypsum, iron, limestone, metals, minerals, oil, ores, plant materials, refractory metals, rubber, sand, soils, steel, titanium, tobacco, etc.
Measured elements | carbon, sulfur |
Samples | inorganic, organic |
Furnace alignment | horizontal (resistance furnace) and vertical (induction furnace) |
Sample carrier | ceramic boats / crucibles |
Field of application | agriculture, chemistry / plastics, coal / power plant, construction materials, engineering / electronics, environment / recycling, geology / mining, glass / ceramics, medicine / pharmaceuticals, steel / metallurgy |
Furnaces | induction furnace, above 2,000 °C |
resistance furnace (ceramic tube), adjustable up to 1,550 °C (steps of 1 °C) | |
Detection method | solid state infrared absorption |
Number of IR cells | 04-Jan |
Material of IR path | gold |
Typical analysis time | induction furnace 40 – 50 s |
resistance furnace 60 – 120 s | |
Chemicals required | magnesium perchlorate, platinized silica (alternatively copper oxide), sodium hydroxide |
Gas required | compressed air (4 – 6 bar / 60 – 90 psi) |
oxygen 99.5 % pure (2 – 4 bar / 30 – 60 psi) | |
Power requirements induction furnace | 230 V, 50/60 Hz, 16 A fuse |
Power requirements resistance furnace | 230 V, 50/60 Hz, 20 A fuse |
Dimensions (W x H x D) | 89 x 84 x 79 cm |
Weight | ~ 200 kg |
Required equipment | balance (resolution 0.0001g), monitor, PC |
Optional accessories | Autoloader for 36 crucibles, carrier gas purification, HTF-540 pre-heating furnace |
Download Data Sheet: Carbon/Sulfur Analyzer ELEMENTRAC CS-d
Ref: eltra.com
Another Article: