Bamo SECURICUVE Level Controller a float at the bottom of a stem moves a magnet inside the head housing. The fluid maintains the equipment (float, stem, and magnet) in the highest position ”a” (normal status). When the fluid level is going down, the equipment comes in the lowest position, down to block on stopper, position ”b”.
The switch BSM changes from normal status to alarm status. To test the complete system, it is sufficient to push down the float to the lowest position or by draining part of the container. For a safe operating condition, it would be better to test regularly the complete system.
Float, stem, bracket, head | Or PPH, or PVDF |
Temperature max. | PPH = 105 °C / PVDF = 140 °C |
Pressure | Atmospheric |
Fitting | Bracket in PPH or PVDF, 60×150 mm, 10 mm thick |
CONTACT BSM 501 (not included) | |
Rated voltage | 4…250VAC;4V…30VDC |
Rated current | 1 mA … 3 A (AC or DC) |
Switch | Microswitch bi-stable, change-over |
Connector | Plug according DIN 43650 |
Cable | Cross section 1,5 mm² max. |
Cable gland | PG 13.5 |
Ambient temperature | -20 … +90 °C |
Housing | Translucent polycarbonate, IP 65 |
Download Data Sheet: Level Controller SECURICUVE
Ref: bamo.eu