Microsensorcorp MPM489B pressure transmitter is designed especially for pressure measures and control of petroleum, chemical industry, water conservancy, and electricity, etc. The product has good performance and stability, good resistance of EMI, and protection for instantaneous high pressure and surges interference which is produced by thunder, noise, and sharp pulse, etc.
‘The product could work reliably and stably in a rough environment for a long time
Pressure range | -0.1MPa…0MPa~0.02MPa~100MPa |
Media | the liquid or gas which is compatible with stainless steel 1Cr18Ni9Ti |
Power supply | 12~28VDC |
Output signal | 4~20mADC, 2-wire |
Load | R≤(U-12)/0.02Ω |
Accuracy | 0.5~FS |
Thermal error | 0.03%FS/℃ (≤100kPa), 0.02%FS/℃ (>100kPa) |
Overpressure | 1.5 times FS or 110MPa (min. value is valid) |
Environment temp. | -30℃ ~+80℃ , -10℃ ~+60℃ (intrinsic safe version) |
Media temp. | -40℃ ~+80℃ |
Storage temp. | -40℃ ~+85℃ |
Shock | 3-dimensional 10g /frequency 50Hz/ swing1mm, zero and span change<0.3%FS |
Impact | 100g/20ms, zero and span change<0.3%FS |
Humidity | 0~90%RH |
Protection | IP65 |
Frequency response | >1kHz |
Endurance | 106 pressure cycles |
Notes
Download Datasheet: MPM489B, Microsensorcorp-Pressure Transmitter
Ref: Microsensorcorp.com
Other Article: