Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
Overview Hengstler 633 DIN Time Counter is a time counter without a reset function and which, due to its DIN rail fixing and low power consumption, is suitable for use in switch cabinets. The time counter is connected up using screw terminals. Whether you use electronic, electromechanical, mechanical, or pneumatic counters, the devices available have […]
Description Dinel PDU–420–W Programmable Display is equipped with one current input 0-20 / 4-20mA and one voltage input 0-5 / 1-5 / 0-10 / 2-10V. The current input has an additional overcurrent protection circuit, which protects the standard resistors. The selection of active input is realized by software, and selected input can be changed at […]
Dinel LDU–401 Local Process Indicator is fit for all level meters with 4 … 20 mA with 2-wire technique. Customers can use the two buttons to program the zero point, span, decimal point, damping and alarm point, etc. Over or under range are displayed as a message. The integrated smart diagnostic system continuously monitors all […]
Description Dinel MGU–800 Multifunction Graphical is a sophisticated multichannel unit that allows simultaneous measurement, visualization, and control of numerous channels. This device can operate autonomously or with cooperation with external measurement devices and actuators. The MGU–800 is designed as a modular device consisting of a base and optional input and output modules. The MGU–800 displays […]
Description Dinel PCU–100 Programmable Control Unit is used for measurement, displaying, and archiving of the physical value (liquid level, pressure, flow, temperature, etc.). One transducer of physical magnitude with an analog 4-20 mA output can be connected to the unit. Different types of conversion (converting) characteristics (linear, square, root, and user-defined), may be selected, also […]
Description Dinel PDU–401–P Programmable Display is equipped with one current input 0-20 / 4-20mA and one voltage input 0-5 / 1-5 / 0-10 / 2-10V. The current input has an additional overcurrent protection circuit, which protects the standard resistors. The selection of active input is realized by software, and selected input can be changed at […]
