Description Dwyer GVS Series Piston Globe Valve Switch offer accurate flow detection with 1% repeatability and external adjustability over a broad range of flow settings for compatible liquids. Shuttle or piston flow switches are sensors with an electrical contact output at a specific flow rate. Models are used with oil, air, water and gases. Applications […]
Description APG DCR-1006A display controller works together with our MNU or DST ultrasonic sensors as well as the MPX level probe to allow simple level monitoring and control without the need for a more advanced system. This system performs reliably to meet your application needs today. With several sensors to choose from, and a variety […]
Description Dwyer Series G9 Piston Globe Flow Switch provides accurate flow detection in water and oil with ±1% repeatability. A shuttle bypass vane inside the housing is controlled externally using an ordinary flat blade screwdriver, allowing flow settings to be changed without disassembly. Shuttle or piston flow switches are sensors with an electrical contact output […]
Description APG RST-5003 Series Web Enabled Modbus Network Controllers connect APG Tank Cloud sensors to the cloud, as well as any 4-20mA sensor. You’ll need this connection module unless you’re using an LOE as your Tank Cloud master. The Web-Enabled Display Control Modules RST-5003 offers affordable remote tank monitoring by taking your 4-20 mA or […]
Overview Heavy-duty safety switches provide a highly visible means of disconnect to help improve personnel safety and equipment protection. Additionally, they’re Ideal for applications where reliable performance, safety, and service continuity are critical. Heavy-duty safety switches Applications For heavy commercial and industrial applications where reliable performance and service continuity are critical. For the toughest heavy […]
Product Description 30–600A Suitable for service entrance applications unless otherwise noted Fusible and non-fusible switches are 100% load break and 100% load make rated The continuous load current of fusible switches is not to exceed 80% of the rating of fuses employed in other than motor circuits. Non-fusible switches are 100% fully rated 200–600A features […]