General Description Wenglor OCP352H0180 sensors work with a high-resolution CMOS line and DSP technology and determine distance using angular measurement. As a result, material, color, and brightness-related measurement differences are virtually eliminated. The integrated analog output can be configured for voltage 0…10 V (10…0 V) or current 4…20 mA (20…4 mA). Linearity: 0,15 % (resolution-mode) […]
Description KN-V200 / CNC water tank iron, aluminum, copper chip suction filter/ Use the suction spout to safely remove coolants, chips, and swarf, the high-power pump delivers sufficient suction to cut the cleaning times for the machine and emulsions to a minimum. King Nice Technology said that after committing to the development of environmental protection, […]
Description KN-V160 Oil Skimmers’ newly developed “Air type ultra-purification filtration machine” not only can easily remove chips but also can filter and purify oily and water-soluble cutting fluids to solve customer’s problems in this regard, so it is highly appreciated. Liquid filter purification, easy removal. Patented technology – easily correspond with liquid, water-soluble and Pure-oil […]
Description KN-V50 / A50 / Cutting oil cleaning cooling lubricant filtration / King Nice Technology not only has a large number of users in Taiwan but also has a good reputation in the international market. The “pneumatic ultra-purification filtration cycle machine” adopts the air pressure driving method to avoid the occurrence of industrial safety problems. […]
Description King Nice KN-1 Floating Oil Removal skimmers for CNC Machine / King Nice Technology said that after committing to the development of environmental protection deeply understands the serious environmental problems nowadays. He focuses on industrial waste oil and wastewater treatment and concentrates on oil and water purification products. At present, the three main products […]
Description KN-PLUS Oil skimmer and Coolant Purifying Machine remove tramp oils / Depending on the type of processing fluid, the lubricating oil and grease used on the machine will be emulsified by the metal cutting fluid or floated on the surface of the working fluid in a “slick” manner. In either case, oil slick or […]