Digital Display for Signal Input DSA 1010 Hengesbach

Digital Display for Signal Input DSA 1010 Hengesbach

Digital Display for Signal Input DSA 1010
Digital Display for Signal Input DSA 1010

Hengesbach is a company from Deutschland. And Hengesbach develops, manufactures and distributes innovative measuring technology for applications in production processes where functionality, reliability and accuracy of the instruments are of highest priority even under extreme process conditions. This modern understanding of value creation of a medium-sized company already has a long tradition with us. Based on many years of experience, we know that the success and strategic security of the company is the result of a lasting and uncompromising appreciation of all involved stakeholders – and this in a global context.

Digital Display for Signal Input DSA 1010

The DSA 1010 digital display for wall structures is suitable for 0/4…20 mA or 0…+10 V DC input signals. The measuring input is galvanically separated from the supply voltage. The transmitter supply allows direct connection of 2- and 3-wire transmitters, e.g. for pressure or temperature. Display range and decimal points are freely programmable within the digits ± 9999. The fact that several parameters can be programmed allows universal application of the device.


  • for standard signals 0/4…20 mA and 0…10V DC
  • Simple installation due to the wall structrue with field housing
  • display range and decimal point freely programmable
  • field housing with hinged LID
  • optional with 2 alarm outputs, relay

Another Article:


General information

Device type DSA 1010 digital display for wall structures
Applications Display of standard signals


Current input 0/4…20 mA; Ri = 10 Ω
Voltage input 0…10 V; Ri = <100 k Ω
Potentiometer 0…1 kΩ/100 kΩ
Basic accuracy < 0,1% ±2 Digit
Temperature coefficient 0.004%/K
Transmitter supply U0 approx. 24V, Ri approx. 150 Ω, max. 50 mA (max. 25 mA at 4 relay outputs)


Display scope ± 9999(0) digits with suppression of leading zeroes
Additional display LED 2 digits, red, 7 mm (display for parameter and switching state)


Relay Change-over contact < 250 V AC < 250 VA < 2A, < 300 V DC < 50 VA < 2 A
Analog output 0/4…20 mA working resistance ≤ 500 Ω; 0/2…10V working resistance > 500 Ω, No galvanic
separation, output switches automatically (load-dependent)
Accuracy 0.1%; TK 0.01 %/K

Conditions for use

Operation temperature -20…+55 °C

Auxiliary energy

Supply voltage 230 V AC ± 10%; 115 V AC ± 10%; 24 V AC ± 10 % or 24 V DC ± 15%
Power input max. 3.5 VA
Rated voltage 250 V~ according to VDE 0110 between input/output/auxiliary voltage, Overvoltage Category
Test voltage 4 kV= between input/output/auxiliary voltage
CE conformity EN55022, EN60555, IEC61000-4-3/4/5/11/13

Design configuration

Housing Glassfibre-reinforced polyamide PA6-GF 15/15 for wall structures
Dimensions see dimensional drawing
Weight max. 450 g
Connection Spring-loaded clamps, 2 mm² single wire, 1.5 mm² single wire, AWG14
Type of protection IP 65, clamps IP 20, contact protected according to BGV A3

Download Data Sheet: Digital Display for Signal Input DSA 1010