Flo-Corp CDRM Radio Module Connex Compatible

Flo-Corp CDRM Radio Module Connex Compatible is a wireless I/O monitoring solution solving vast numbers of industrial automation challenges using point-to-point radio communications. Never trench or run conduit and wires again. The savings of hardware and installation cost is significant and will provide fast, reliable remote monitoring and control/alarming to the CONNEX 3D™ monitoring solution.

The CONNEX 3D™ is a revolutionary concept in the process instrumentation market. It is flexible, versatile, and adaptable due to the variety of modules that connect to each other. Think of the modules like Legos®, pick and choose from a wide variety of options that plug into your CONNEX 3D to create a unique system to fit your exact needs.

Flo-Corp CDRM Radio Module Features and benefits

  • Replicate raw signals in either direction
  • No software or programming required
  • Easily mounts on 35 mm DIN raiils
  • Class I, Div 2 (Zone 2)
  • -40ºF to 176ºF (-40º to 80ºC)
  • 900 MHz or 2.4 GHz radio operation
  • Secure AES encryption
  • 5-year warranty

Specification

FREQUENCY 902-928 MHz or 2.4 GHz
License-Free ISM Band
ANTENNA CONNECTOR TYPE SMA (Female Connector)
DEFAULT TRANSMIT SPEED/ UPDATE 1 Second
TURBO TX SPEED BASED ON NUMBER OF I/O MODULES =100 ms, 2-3=200 ms, 4= 250
ms, 5-6=333 ms, 7-11=500 ms,
12-16=1 second
OUTDOOR/LINE OF SIGHT MAX RANGE2 900 MHz: 6.3 Miles (10.1 Km)
2.4 GHz: 5.7 Mile (9.2 Km)
INDOOR/URBAN RANGE 900 MHz: 1000 ft (305 m)
2.4 GHz: 300 ft (90 m)
MAXIMUM TRANSMIT POWER (ADJUSTABLE WITH ADVANCE UI) 900 MHz: 24 dBm (250 mW)
2.4 GHz: 18 dBm (63 mW)
RECEIVER SENSITIVITY 900 MHz: -101 dBm / 2.4 GHz:
-100 dBm
SPREAD SPECTRUM 900 MHz: FHSS / 2.4 GHz DSSS
RF SECURITY 128-bit AES Encryption
CONTROLLED LOCAL SHUTDOWN(ESD) Yes, via Provided Dry Contact Input
RF LINK ALARM DIGITAL OUTPUT Adjustable 2 to 10-Second RF Timeout Trigger (NPN)
I/O LINK ALARM DIGITAL OUTPUT I/O Mismatch, Bus or Module Failure (NPN)
RF LINK DIAGNOSTICS (LEFT LED) Green = RF Traffic / Yellow = RF Link Fail
I/O LINK DIAGNOSTICS (RIGHT LED) Green = I/O OK, Modules Detected / Red = I/O Link Fail
SUPPLY VOLTAGE RANGE 9 – 30 Vdc ( 5 %)
REVERSE POLARITY PROTECTION Yes
ADVANCED USER INTERFACE FEATURES Test RSSI, Tx Power Adjustment, Force Local Output(s), Set Fail-Safe Parameters, and Additional Diagnostics
POWER CONSUMPTION 35 mA @ 12V AVG (10% Duty Cycle)
Specifications are subject to change without notice.

Download Datasheet: Radio Module (CDRM) CONNEX COMPATIBLE, Flocorp-Monitor

Ref: Flo-corp.com

Another Article:

Share
%d bloggers like this: