Pulsar’s Flow Monitor

Pulsar’s Flow Monitor
Flow Monitor

Flow Monitor is a dedicated wall mounted device for use with Pulsar’s Flow Pulse flow sensor in fixed or permanent installations. The Flow Monitor is powered using either an AC or DC power supply which then provides the Flow Pulse flow sensor with power and offers an interface via a 4-core cable.

Flow Monitor expands the capability of the Flow Pulse flow sensor by providing two relays that can be programmed as alarm (relay 1) or control (relay 2) for flow or velocity, or either relay can alternatively be programmed as a totaliser.

Flow Monitor also provides a mA output and onboard logging, including a daily total. Typical capacity is 36 days flow logging at 1 minute intervals (using optional logging software – UltraLog).

Flow Monitor has an LCD display of flow rate and flow velocity (selectable), and is menu-programmable via a set of function keys.

  Another Article:

Features

  • Power for Flow Pulse 22-28V DC and Universal AC 85-264V
  • Display for flow/velocity from single Flow Pulse controller
  • Setup of Flow Pulse sensor
  • Two programmable relays for control and alarm
  • Daily and system / resettable totalisers
  • Logging, setup and download via Optional Log Software

Specifications

Physical

Dimensions: 130 x 150 x 63.5mm (5.12 x 5.9 x 2.5in) Wall mount only.
Weight: Nominal 0.65kg (1.43lbs)
Enclosure material/description: ABS base with polycarbonate lid, flammability rating UL94HB
Cable entry detail: Underside fitted with 3 x M20, nylon cable glands suitable for 6-12mm cable
Transducer cable extensions: 5-core screened
Maximum separation: 500m (1640ft)

Environmental

Enclosure protection: IP66/67
Max. and min. temperature (electronics): -20°C to +50°C (-4°F to +122°F)

Approvals

CE approvals: Listed in the Certificate of Conformity within the manual.

Outputs

Analogue outputs: Isolated active output (passive output optional) of 4-20mA or 0-20mA into 1kΩ (user programmable and adjustable) 0.1% resolution
Volt-free contacts, number & rating: 2 form “C” (SPDT) rated at 2A at 240V ac
Display: 2 x 12 alpha numeric
Serial port: RS232 for programming and data extraction

Programming

On-board programming: By integral keypad.
PC programming: Via RS232
Programming security: Via passcode (user selectable and adjustable)
Programmed data integrity: Via non-volatile RAM
PC software: UltraLog

Supply

Operating voltage: 85-264V ac 50-60Hz, 22-28Vdc.
Power consumption: 10W maximum power (typically 8W)
Main fuse: 2A ‘T’ 20mm
DC fuse: Self resetting type

Download Datasheet: Pulsar’s Flow Monitor

Reference : pulsar-pm.com

Be the first to comment